Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Ammunition & Reloading (
-   -   Small Base Sizing Die for 9mm (

Trez 10-19-2011 03:09 PM

Small Base Sizing Die for 9mm
Do they make a small base sizing die for 9mm? Ive seen them for rifle calibers, but none for handguns.... My Medusa is a little picky with the tapered 9mm's and sometimes the rounds fit tighter in the cylinder than I would like...

Its real bad with factory 9mm, but really doesnt have a problem with sized and reloaded ammo.... :confused:

rclink 10-20-2011 12:31 AM

9mm die
You might try a Lee Carbide Factory Crimp die.
It had a carbide ring to size the loaded round.

anm2_man 10-20-2011 08:21 PM

IF you have problems with a tight chamber and factory ammo, You could get it to a gunsmith and have him resize the chamber. If its only happening with reloaded ammo, you could try this: Undersize Reloading Dies: Evolution Gun Works Inc.


All times are GMT. The time now is 04:05 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.