Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Ammunition & Reloading (http://www.firearmstalk.com/forums/f30/)
-   -   Rubuilding my reloading bench. (http://www.firearmstalk.com/forums/f30/rubuilding-my-reloading-bench-8156/)

cpttango30 11-02-2008 09:14 PM

Rubuilding my reloading bench.
 
After adding a Dillon RL550b with a Strong mount and bullet tray to a bench with an RCBS RS5 press things got a little cramped. I need the bench to work on guns, chainsaws and lawn equipment. So I decided to add as much space as I could to the bench another 2' should do it. I went from a 2x4' bench to a now 2x6' bench I took the over head off and I am going to attach the peg board to the wall behind the bench I need to go and get 2 more outlets so I have power at the bench. the top is going to be 2 5/8" thick sheets of plywood with a covering. Here are a few pics of it midway threw. The bottom will get 2 sheets of 3/4" OSB with a covering on it as well. I was going to screw it to the wall studs but after getting the top on it was plenty heavy.

http://i95.photobucket.com/albums/l134/a/SD530344.jpg

http://i95.photobucket.com/albums/l134/a/SD530345.jpg

Ok it is now finished and everything is put back in place (kind of).


http://i95.photobucket.com/albums/l134/a/SD530346.jpg

http://i95.photobucket.com/albums/l134/a/SD530347.jpg

cpttango30 11-02-2008 11:34 PM

http://i95.photobucket.com/albums/l134/a/SD530348.jpg

Here is the final product all loaded and ready to go well I have not mounted my presses yet.

http://i95.photobucket.com/albums/l134/a/SD530349.jpg

Mark F 11-03-2008 10:15 AM

Plenty HEAVY DUTY! Very nice!!!

cpttango30 11-04-2008 11:07 AM

Well I mounted the Dillon Last night. IT now sits where the yellow eyeball burning drop light sits. I moved it back far enough that I have some room on the front and the handle does not hit the bench.

Mark F 11-04-2008 07:49 PM

Quote:

Originally Posted by cpttango30 (Post 48588)
Well I mounted the Dillon Last night. IT now sits where the yellow eyeball burning drop light sits. I moved it back far enough that I have some room on the front and the handle does not hit the bench.

Let's get some reloadin' done!!!!

cpttango30 11-05-2008 10:44 AM

Gotta stock up on supplys low on bullets for my 223. and low on cases and boxes for my 45acp.

cpttango30 11-08-2008 02:57 AM

I finished it tonight. I now have both presses mounted and ready to go. Now I just need to buy more bullets. http://i95.photobucket.com/albums/l134/a/SD530353.jpg

http://i95.photobucket.com/albums/l134/a/SD530357-1.jpg


All times are GMT. The time now is 03:27 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.