Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Ammunition & Reloading (http://www.firearmstalk.com/forums/f30/)
-   -   Reloading 7.62x25 Milsurp Brass (http://www.firearmstalk.com/forums/f30/reloading-7-62x25-milsurp-brass-71625/)

zebramochaman 09-02-2012 02:41 AM

Reloading 7.62x25 Milsurp Brass
 
I am a relatively new reloader so please go easy on me for this question.
Is it possible and/or cost effective to reload Berdan-Primed Milsurp Brass? I purchased 800 rounds of Milsurp along with the purchase of my M57 Yugo Tokarov. I was underwhelmed by the accuracy of the pistol using this ammo, but the price was right for plinking (20c/round). This was old Bulgarian ammo. After opening the Spam Can, the paper packets fell apart in my hands. In addition, I know that this ammo is corrosive so I immediately did a thorough cleaning of the gun after coming home from the range. My hope is that I will be able to recycle the brass and create some accurate loads.

c3shooter 09-02-2012 04:07 AM

Yes, it is possible to reload. However, you DO understand that standard reloading equipment will not de-cap Berdan primers? And the process is pretty much a PITA?

res45 09-02-2012 12:10 PM

Berdan primed case pose many problem for the average reloader. First off the process of removing the primer is totally different,you either have to buy one of those RCBS decapping tools about $60 or make your own for punching through the old primer cup and popping it out.

Then you have the issue of actually finding small pistol berdan primes which to my knowledge nobody sells in the US anymore and haven't for many years and you can't simply just substitute a standard SP primer without reworking the primer pocket to convert it to use boxer primers. Berdan primers are also measured in millimeters and require different primers seating tools or modification of current available tools to seat properly and to the correct depth.

Bulgarian berdan primed brass is not the best quality brass to reload as it can suffer from age cracking issues. I know it's just doesn't seem normal to toss all that surplus brass,I have plenty of the stuff myself in 54r and I would be the first to want to save it for future use myself but the cost/time benefit makes it just not worth it when better options are available. I just toss it in the brass scrap bucket and sell mine to the local recyclers.

A better option wold be to just buy new brass https://www.starlinebrass.com/brass-cases/762x25-Tokarev-Brass/ small quantities of 100 can be purchase at most places that sell reloading components.

In a pinch you can reform 5.56/.223 brass or Win. 9mm Magnum cases into 7.62 x 25 brass it is a little extra work but not as much as trying to reload or convert berdan primed 7.62 x 25 cases.


All times are GMT. The time now is 03:50 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.