Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Ammunition & Reloading (http://www.firearmstalk.com/forums/f30/)
-   -   New reloader needs Advice and/or Help (http://www.firearmstalk.com/forums/f30/new-reloader-needs-advice-help-83639/)

Ranger185 02-07-2013 02:34 PM

New reloader needs Advice and/or Help
 
I have wanted to do this for years and finally after getting the last one in college I get to start now and probably not a worse time. I have my RCBS Rock Chunker setup, dies, powder, powder measure, etc.

The problem is I have 38 Special & 9mm brass but no small pistol primers and I have large pistol primers but no 45ACP brass. I have been sizing and deprimering the brass I have but can't put any together to test fire. I did get some small rifle primers but with no experience is it smart to use these in the 38/9mm?? Does anyone know where I can get even a small amount of small pistol primers or 45ACP brass???? Thanks

therhino 02-07-2013 02:54 PM

As you said, it's just a piss-poor time to be starting up. I was all ready to get a press and supplies when I saved the extra cash. Now that I have the cash, there's not a press nor supplies in sight at less than astronomical prices.
Folks are simply recommending you be persistent and opportunistisc when buying ammo and reloading supplies lately. Get to the shop early on delivery days, etc.
I was all set to start working on my C&R collection, but now there's no point as there's no ammo!

jjfuller1 02-07-2013 03:06 PM

DO NOT USE any primer incorrectly. this can not be a safe practice. do you have a reloading book you are consulting? double check but i thought the 9mm used large pistol primers. i know my .40 does.

heres a website with great data on loads, however i did not see it listed what primer to use


http://data.hodgdon.com/main_menu.asp

you could also check our brass tader thread here. it may be possible for you to trade for some .45acp
http://www.firearmstalk.com/forums/f30/brass-trader-49001/

c3shooter 02-07-2013 04:13 PM

Repeat after me- Powder, Bullet, Primer, Brass. Follow the recipe and do not try free-lancing until you have a test lab.

And NO- do not use rifle primers. Typically harder metal shell, MAY be taller than the pistol primers.

For 45 ACP brass, any ranges around you? You know you CAN buy once fired brass- and shipping is cheap. Check gunbroker and gunauction.

Ranger185 02-07-2013 07:59 PM

Really lucked up on the press and the gun shop did not jack the price up one cent. I have had to order from 4 different places to get stuff in stock. I have the Lymans and have really researched the Hodgon Data and several others and have a laptop on my reloading bench. Yeah I get about the same number of yes and no on the small rifle primers and I am not willing to go 50/50 I will wait. I am going to check another range this evening the first 2 were a solid NO...

Mack Bolan 02-07-2013 08:24 PM

check lohman arms out of texas.....
www.lohmanarms.com

I was on their site about a week or two ago and they still had several brands of rifle and pistol primers in stock.....only problem is if you place an order it could still take 4-8 weeks for them to ship it.

jjfuller1 02-07-2013 09:44 PM

I am wrong. I consulted my Manuel's and 9mm and 40 use small pistol primers. But stilll don't use a rifle primer

Axxe55 02-07-2013 09:53 PM

simple. rifle primers are for rifles and pistol primers are for pistols. even if they do fit, there is probably a good reason there is a difference in them being marked as they are.

don't experiment with the unknown when it come to reloading. you life and limbs are always in danger if you do.

locutus 02-07-2013 10:51 PM

Quote:

Originally Posted by jjfuller1 (Post 1127780)
DO NOT USE any primer incorrectly. this can not be a safe practice. do you have a reloading book you are consulting? double check but i thought the 9mm used large pistol primers. i know my .40 does.

According tro SAAMI specs, and all reloading manuals, 9MM and .40 S&W use small pistol primers.

jjfuller1 02-08-2013 03:02 PM

Quote:

Originally Posted by locutus (Post 1128455)
According tro SAAMI specs, and all reloading manuals, 9MM and .40 S&W use small pistol primers.

i know, ^^ thats why i corrected myself. i was remembering wrong. hehe


All times are GMT. The time now is 02:57 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.