Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Ammunition & Reloading (
-   -   Need help with me lee pro 1000 (

keas3 12-05-2012 06:48 PM

Need help with me lee pro 1000
2 Attachment(s)
The shell holder is not cyclin around correctly it is off just enough that the priming arm catches! Anyone know how I fix that problem?

Tenderribbs 12-05-2012 10:12 PM

I just got my Lee master loader set up so I am not a pro yet by far, but mine had to be indexed by loosening the nut on bottom of handle . This made it align up when I rotated the shell holder , If I'm understanding the problem correctly .

Rick1967 12-05-2012 10:48 PM

There is a screw on the side on the bottom of the head that goes up and down. That screw adjusts the head back and forth to time it. It is on the left side near the front.

keas3 12-06-2012 09:08 PM

Thanks I did some research online and y'all are right it was the index screw! Now all I need is the proper shell plate that's in the mail and I'll be cranking out my .38 spec ammo again!!

hnealg 12-09-2012 01:02 PM

check out YouTube and Lee's website
There are several videos on line that show the various adjustments on the Lee Pro (there are several)
Also, there are some good tips/suggestions

All times are GMT. The time now is 07:55 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.