Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Ammunition & Reloading (
-   -   Need data for mil-spec 5.56 handload (

assualtready070 04-04-2013 11:55 AM

Need data for mil-spec 5.56 handload
I want to try to make a 5.56 load that is as close as possible to what the US military and NATO troops use. I would rather load the 62 gr. FMJ-BT But I can settle for 55 gr. Now from what I've read the majority of people say to use H335 powder, CCI primer ( I can't remember if its CCI 400 or 41 that could be wrong.) and any brass with the NATO head stamp. Can anyone tell me if the have a mil-spec 5.56 load for 62 gr. and 55 gr FMJ-BT.

robocop10mm 04-04-2013 02:20 PM

Work up toward max with the 62 gr and H-335. You should be able to get really close. Understand accuracy will not be great at max loadings, just as with M-855 ammo

locutus 04-04-2013 03:16 PM

You will need a MilSpec primer such as the Remington 7 1/2. H335 powder and Rem, Fed, or W-W FMJ-BT bullets.

bigjim 04-12-2013 06:34 AM

Exact load you will not get they use different powder than we can buy. H-335 is too fast a powder to get you to Mil-Spec speed, you will need to use a slower powder like H-4895 to get the pressures you want.

My standard load for 62 grain FMJ steel core is 25.1 grains of H-4895 at OAL of 2.250 inch with a Win SRP. And be sure to crimp those rounds.

As the man said start lower and work your way up.


mseric 04-12-2013 12:11 PM

Ramshot and Accurate have 5.56 62K psi load data.

All times are GMT. The time now is 03:50 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.