Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Ammunition & Reloading (http://www.firearmstalk.com/forums/f30/)
-   -   How Do I Remove Gas Checks? (http://www.firearmstalk.com/forums/f30/how-do-i-remove-gas-checks-92997/)

cottontop 06-27-2013 03:26 PM

How Do I Remove Gas Checks?
 
I am dismantling some 7x57 ammo that has been loaded with cast lead boolits. I am using an inertia type bullet puller. The boolits come out fine, but the gas check will not come out and remains stuck inside the case. Is there a way to get the gas check out? I don't think it would be good to reload the case with the gas check still in there loose in the case, but it seems to be so light, it might work. Anyone know?
ct

primer1 06-27-2013 05:11 PM

I don't reload, but I am a toolmaker and I'm following what you are saying. Do you have a hook scribe? Maybe a set of small snap ring pliers with the small teeth could grab them.

nitestalker 06-27-2013 05:40 PM

Why did you pull the bullets? I would simply replace the cast bullets and fire the rounds. If you seat a plain base jacketed bullet securely against the gas check you can fire it out.
I have filled the necks with paraffin and shot them out. Just check the bore each time it is fired.:)

cottontop 06-27-2013 06:46 PM

???
 
Quote:

Originally Posted by nitestalker (Post 1288457)
Why did you pull the bullets? I would simply replace the cast bullets and fire the rounds. If you seat a plain base jacketed bullet securely against the gas check you can fire it out.
I have filled the necks with paraffin and shot them out. Just check the bore each time it is fired.:)


Don't you have to pull the bullets in order to replace them? Also, I have no idea what powder charge is in there or what powder is used.
ct

cottontop 06-27-2013 06:50 PM

Quote:

Originally Posted by primer1 (Post 1288437)
I don't reload, but I am a toolmaker and I'm following what you are saying. Do you have a hook scribe? Maybe a set of small snap ring pliers with the small teeth could grab them.


I found a pair of hemostat pliers in my tool box and they worked great. All the gas checks are removed. Thanks for the tip.
ct


All times are GMT. The time now is 05:31 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.