Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Ammunition & Reloading (http://www.firearmstalk.com/forums/f30/)
-   -   Glock Reloads? (http://www.firearmstalk.com/forums/f30/glock-reloads-562/)

ShotgunPrincess 05-23-2007 04:12 PM

Glock Reloads?
 
I just got a G30 .45 ACP and was wondering if anyone has a good recipe for reloads? Nothing too hot, just a good basic load that works great.

Dgunsmith 05-24-2007 06:15 PM

GLOCK Reloads:
 
Firing reloads in a Glock VOIDS the factory warranty !

Reloads are fine if done properly, Glock factory barrels are NOT suitable to lead bullets.

If you want to shoot reloads safely in a Glock, replace the factory barrel with any of the after-market barrels that are heat treated. They will shoot anything, lead or jacketed, and keep you safe.

Glock does not heat treat their barrels...thats why they fail or KB = Kaboom !

jberry 06-29-2007 03:28 PM

The .40 cal Glocks have a reputation for not fully supporting the case near the head, possibly leading to weakness and head separation after reloading. Not sure if the .45s are the same. Glock factory barrels are fine if you don't shoot lead bullets...

allmons 06-29-2007 03:40 PM

Glocks should NOT fire reloads
 
Read your manual. Believe me, if the factory says "Don't do it", you SHOULD heed their advice. They engineered the weapon and KNOW what is best for it.
DO NOT shoot reloads in Glocks, regardless of who makes the barrel or what the chamber supports or doesn't support.

Best case scenario - saving .04 cents a round is just not worth it. Always heed the manufacturer's instructions.

:)

ranger_sxt 07-05-2007 10:31 AM

Quote:

Originally Posted by allmons (Post 3459)
Read your manual. Believe me, if the factory says "Don't do it", you SHOULD heed their advice. They engineered the weapon and KNOW what is best for it.
DO NOT shoot reloads in Glocks, regardless of who makes the barrel or what the chamber supports or doesn't support.

Best case scenario - saving .04 cents a round is just not worth it. Always heed the manufacturer's instructions.

:)

Most, if not all, firearm manufacturers say that as a matter of liability. If you blow up your gun because you were trying to make +P++ rounds, they don't want the legal flak from your injuries.

Glock is the only company that means it.

robocop10mm 07-05-2007 03:52 PM

Glock reloads
 
The only glocks that have supported chambers are the .357 sigs. All of the rest WILL bulge the brass. In the early days of glocks, the commercial reloaders would not reload the glock fired brass. They scrapped it. With the invention of the case pro, that has changed. The brass can now be reconditioned to new specs from the rim to the mouth. There is one problem though. Brass will "work harden". That is to say it will get harder and more brittle as it is repeatedly fired and resized. If a piece of brass is fired several times in a glock and resized (conventionally or through a case pro) it will get brittle in the area that is not supported and eventually blow out. This will suck, bad.

My solution? Don't own glocks.

RePete 08-22-2007 01:00 PM

I reload for my 17, but use jacketed projectiles only. I have friends that reload their 9's, 40's and 45's, and all use jacketed.

If you want to reload using lead, then get an aftermarket barrel with trditional rifling.

billt 09-21-2007 03:01 AM

There is no reason you cannot reload for a Glock same as any other handgun. ALL gun manufacturers state their warranty is void if "reloads" are used. It's standard lawyer talk these days. With the amount of ammunition recalls in recent years I feel a lot safer firing my own loads than most factory cartridges. That said, there are some rules you need to follow when handloading for Glocks. First, as was mentioned, use only jacketed bullets. The reason for this is because of the Glocks Polygonal rifling. It does not lend itself well to lead projectiles. Second is it isn't wise to reload brass that was originally fired in a Glock because Glock barrels have an unsupported area at the rear of the chamber which can, in some cases, cause the brass to bulge slightly at the rear. When this brass is resized it can become weak in that area. It's easy to identify this slight bulge. I've reloaded this type of brass and re fired it in my Glock 21 .45 ACP without incident. But I don't handload at the red line. Keep everything a little on the mild side and you won't have issues. It's when you start to push performance levels way up, that you will encounter problems. That can be said of any cartridge fired from any gun. Bill T.


All times are GMT. The time now is 01:37 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.