Dillion rebuild - Page 2
Firearm & Gun Forum - FireArmsTalk.com > Gear & Accessories > Ammunition & Reloading > Dillion rebuild

Reply
 
LinkBack Thread Tools Display Modes
Old 05-28-2010, 03:09 PM   #11
Feedback Score: 0 reviews
 
masterPsmith's Avatar
 
Join Date: May 2009
Location: Barstow area, Kalifornia
Posts: 1,347
Liked 90 Times on 68 Posts
Likes Given: 25

Default

Robo,
When you change your shell plate, use a slight bit of lube on the retaining bolt flange, run it down to where your shell plate stops turning, then back it off ever so slightly until it just turns freely. Then lock it in place. Again ckeck it for free movement. If everything is right, it won't wobble.

Jim.............

__________________
masterPsmith is offline  
 
Reply With Quote
Old 02-09-2012, 02:20 AM   #12
Feedback Score: 0 reviews
 
Join Date: Oct 2009
Posts: 29
Default Update

I sent this back to dillon for a rebuild and since it return have converted it to load 9mm. It runs like a champ now and the only issue I have is keeping it full of components.

I never get up to the output suggested by the MFg, but it cranks out more than I can use as second caliber for competition.

Jmac

__________________
jmac2387 is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
1927 Colt Sistema Rebuild Project CA357 DIY Projects 48 11-01-2009 12:18 AM
C products Rebuild kit's $9.99 Cope's Distributing Sponsor Display 2 07-07-2009 06:24 PM
Rebuild the US with a bust MichaelG Politics, Religion and Controversy 2 12-06-2008 10:03 PM
Reloading on a Dillion XL650 anm2_man Ammunition & Reloading 6 07-29-2008 07:25 PM