Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Ammunition & Reloading (
-   -   Casting Bullets for an AK47 (

Sponge 06-12-2007 05:09 PM

Casting Bullets for an AK47
I have ton of lead weights from shrimp trawls and diver weights. I'm wondering if I can cast lead 7.62 bullets for an AK47. Is it alright to shoot pure lead bullets in a rifle?

What about pure lead bullets in all rifles? I may make some for 7.62x54, 30-06, .270, ect.

robocop10mm 07-03-2007 12:55 PM

cast bullets
You do not want to shoot pure lead in anything over 700-800 fps. For rifles you will need 2 things, Linotype and a gas check bullet. Anything less WILL cause you problems. Linotype is lead with tin and antimony added. It is very hard and very expensive in comparison to soft lead or wheel weights (lead and tin only).

There are bullet molds that are made for just a project. 120-130 gr. pointed w/gas check.

DWARREN123 07-04-2007 11:47 AM

Lead in a gas operated firearm is not generally thought of as good. The lead can get into the gas port in the barrel. Have to make sure it stays clean, can cause operational problems.

All times are GMT. The time now is 04:55 AM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.