Casing Blew Apart (Help Please) Pictures
I reloaded some 40 S & W.. I am almost certain I didn't double charge the casing due to the casing being 2/3 full with a normal charge. Also I did not seat the bullet deeper than instructed.
Can anyone give a good reason why the rim blew off this casing?
I was shooting a Beretta 96FS which will need to go back to beretta because of the damage to the gun.
Powder is Unique 6.5grs, bullet is uni-cor 180 gr TMJ seated 1.124 with federal small pistol primer
I am using a single stage RCBS Rock Chuckar and RCBS Uniflow Powder Measure
The powder charge appears normal (about .2gr under max). The damage to the case looks like a case that had been previously fired through a Glock. Glock's unsupported chamber allow the brass to be overly stressed. They can give out just as shown. That would be my best guess.
This is the real danger in using range brass. You never know what kind of gun it was fired through and how many times it was reloaded before you picked it up.
It has the same failure mode displayed with the combination of weaken brass and a partial supported chamber.
I'm not familiar with the beretta 96FS chamber design but the forensic evidence is pointing that way.
If you continue to reload for the 40S&W (assuming the pistol is still serviceable); I would suggest that you try this NEW tool from Redding:
grx push thru die.html
"The new G-RX push thru Base Sizing Die is designed to restore fired cases from 40 S&W auto-loading pistols that exhibit a bulge near the base.
By passing the case completely through the new G-RX Die,the bulge is removed and the case may be returned to service.
Optional Bottle Adapter fits std. powder & shot bottles with 28-410 thread to provide a convenient reservoir."
I am glad you are OK, from ALL the horror stories I have read about reloading the 40S&W dealing with Glock fired cases previously (assuming Range Pickup Brass was used)!
|All times are GMT. The time now is 05:38 AM.|
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.