backwards bullet. - Page 2
You are Unregistered, please register to use all of the features of!    

Firearm & Gun Forum - > Gear & Accessories > Ammunition & Reloading >

backwards bullet.

LinkBack Thread Tools Display Modes
Old 03-14-2011, 06:20 PM   #11
Feedback Score: 0 reviews
delbert's Avatar
Join Date: Jan 2009
Location: Missouri
Posts: 13

I bought some new Remington brass. My last brass was once fired factory ammo. I neck sized and reloaded twice. After being fired three times, some of them got a little stiff going into the chamber, so I full length sized after third firing. Of course I set the die just like the instructions said, slight cam over at the top of the stroke. I think that's a little short for my rifle. I got case head separation on the fourth firing. I went and bought some new brass and thought I'd try fire forming to get a little more life out of them. Of course I will double check my die setting before I full length again.

delbert is offline  
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
good bullet/bad bullet 556plinker AR-15 Discussion 1 09-21-2010 03:46 AM
Bullet seating. dave06 Ammunition & Reloading 14 08-18-2010 12:36 AM
new bullet iceboxx1953 General Rifle Discussion 3 03-01-2009 04:56 AM
Biting the bullet johnsteele AR-15 Discussion 15 09-17-2008 01:20 AM
Where is the Bullet? GrannySmithy Glock Forum 4 05-20-2008 02:20 AM

Newest Threads