You are Unregistered, please register to use all of the features of FirearmsTalk.com!    

Firearm & Gun Forum - FireArmsTalk.com > Gear & Accessories > Ammunition & Reloading >

9 mm issue with reloading


Reply
 
LinkBack Thread Tools Display Modes
Old 11-27-2011, 04:58 PM   #11
Feedback Score: 0 reviews
 
Rick1967's Avatar
 
Join Date: Feb 2010
Location: Clifton,Colorado
Posts: 4,864
Liked 2616 Times on 1388 Posts
Likes Given: 1511

Default

Quote:
Originally Posted by willfully armed View Post
I run 3.2 gr of titegroup under 147fmj. No problems.
I use that same load under a 140 grain lead cast semi-wadcutter. Shoots great out of a Ruger P-95


__________________
Romans 1:16 I am not ashamed of the gospel, because it is the power of God for the salvation of everyone who believes: first for the Jew, then for the Gentile.
Rick1967 is offline  
 
Reply With Quote
Old 11-27-2011, 05:58 PM   #12
Feedback Score: 0 reviews
 
willfully armed's Avatar
 
Join Date: May 2009
Location: Olathe,JOCO KS
Posts: 2,080
Liked 186 Times on 134 Posts
Likes Given: 15

Default

That's my Idpa load for g34. Pisses my buddy off something fierce.

He has to go 3.5 to get the same velocity from his 5" Springer 1911


__________________
Shooter ready....
willfully armed is offline  
 
Reply With Quote
Old 11-27-2011, 06:35 PM   #13
Feedback Score: 0 reviews
 
Rick1967's Avatar
 
Join Date: Feb 2010
Location: Clifton,Colorado
Posts: 4,864
Liked 2616 Times on 1388 Posts
Likes Given: 1511

Default

I know a lot of the IDPA guys are going to the 40 because they can shoot a much lighter load and reach the power floor. I shoot a 1911 in .45 myself. I use a 200 grain lead cast round nose flat point over 4.9 grains of titegroup.
Super Accurate, very controlable.

Sorry. I got a little of topic.
__________________
Romans 1:16 I am not ashamed of the gospel, because it is the power of God for the salvation of everyone who believes: first for the Jew, then for the Gentile.
Rick1967 is offline  
 
Reply With Quote
Old 11-27-2011, 06:56 PM   #14
Feedback Score: 0 reviews
 
lonewolf101's Avatar
 
Join Date: Jun 2011
Location: Wisconsin
Posts: 528
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by mrbirdguy View Post
How does the clays universal work in 38special
What powder would you recommend for the 9mm
I use power pistol in my 9mm

unique
bullseye
tightgroup
lonewolf101 is offline  
 
Reply With Quote
Old 11-27-2011, 09:28 PM   #15
Feedback Score: 0 reviews
 
hnealg's Avatar
 
Join Date: May 2010
Location: Lawrenceville,Georgia
Posts: 80
Default

I've used 5.0 gr of Univ Clays with a 124 gr bullet. Works like a charm in my Glock 19. I think 4.2 is too low. Check a couple of sources for load data. But there has been some excellent powder suggestions here.


__________________
"To disarm the people is the most effectual way to enslave them."
- George Mason
hnealg is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
Built A reloading bench and i am reloading now CAR Ammunition & Reloading 19 08-03-2012 04:55 AM
Odd 9mm reloading issue, OAL Desdenova Ammunition & Reloading 4 06-18-2011 12:42 PM
Is this an issue? WDbeej Semi-Auto Handguns 9 06-07-2011 05:04 AM
.357 with an Issue... CastleKing Revolver Handguns 10 05-25-2010 01:10 AM
Reloading Issue - 7mm SAUM Ammo Wxstorm Ammunition & Reloading 5 01-27-2010 07:26 PM