Winchester 1912, 12GA
 

I took down a Winchester 1912 and having problems getting it back together.
When I removed the trigger housing the Cartridge Cutoff fell out. I did not see where it came from. I knew it had to go on the side of the chamber so there is a small rod stud on the cutoff and there is a rod hole that fits it on the side of the chamber and it fits niceley. When I put the trigger housing back in the carrier hits on the cartridge cut off and jams. Can someone help me Please.
Thanks
Dick

Never have had one apart. there is some discussion of disassembly here Winchester Model 12


http://www.americanrifleman.org/Webc...2EXView_PG.jpg