Hi all, new member here. I have a winchester 1300 12g. I can chamber the first round and it fires fine, but the slide jams and I cant pull it back to eject the shell. Not sure if the problem is with the bolt or the slide itself. It kind of looks like the notches on the bolt which hold the slide in place are a little worn. Should I buy a new bolt, slide or both?
Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.
Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.
Does it cycle live ammo OK? If so, it is probably related to the chamber. A rusty or pitted chamber will not release the fired hull like it should. Does it do this with all ammo or just the "hot" stuff?
__________________
In life, strive to take the high road....It offers a better field of fire.
"Robo is right" Fuzzball
robocop10mm is likely correct. Take the barrel off and feel the chamber. It should be perfectly smooth. Any bumps or roughness will cause hard extraction.
__________________
Times are tough - Keep your powder dry
"These are the times that try men's souls." - Thomas Paine
winchester 1300 wont cycle
Linear Mode
