Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Shotgun Discussion (http://www.firearmstalk.com/forums/f26/)
-   -   Win.mod. 1897 12ga. (http://www.firearmstalk.com/forums/f26/win-mod-1897-12ga-43745/)

blazinsun69 06-11-2011 04:11 PM

Win.mod. 1897 12ga.
 
5 Attachment(s)
Winchester Mod 97 12 ga. full choke
serial # 876531 with a capital E above the numbers
the bore is in good condition, no pitting or rust.
I'd like an estimate of general condition and any value it might have..
and thanks for any help

blazinsun69 06-11-2011 04:16 PM

more pix
 
2 Attachment(s)
no cat this time... lol

blazinsun69 06-11-2011 06:52 PM

3 Attachment(s)
few more pix

deathkricket 06-11-2011 09:58 PM

Pretty good condition and they go for around $450 at a local cabelas

hiwall 06-12-2011 01:40 PM

to bad someone put the pad on. it eally cuts the value

c3shooter 06-12-2011 02:43 PM

Too bad about your cat. :p

As said, the recoil pad cuts the collectors value. Agree, around $450.

TimL2952 06-12-2011 04:01 PM

anywhere from $300-$1,000 is what I've seen around my area. In your condition I agree with the others... $450ish.

BUT....If I were you...I would NEVER sell that shotgun.

First successful pump shotgun ever designed...and by the genius himself John Browning.

There's alot of history in those weapons.

ta1588 06-12-2011 09:59 PM

is it the field, riot, or trench model? post some pics of the barrel :P

blazinsun69 06-13-2011 02:39 PM

re: barrel pix of model 97 Win.
 
The pix I showed are all I have.. it is not a riot or trench gun... full choke and didn't know enough to measure barrel...
Is it possible to replace the butt plate, providing the stock wasn't trimmed off????
Larry

fireguy 06-13-2011 03:22 PM

I had a 1950's Model 12 that I sold last year that had the stock cut back and a recoil pad installed. After measuring the stock and comparing to an unaltered M12 the offer went down $75. I took it 'cause I wanted to buy different shotgun.


All times are GMT. The time now is 04:34 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.