Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Shotgun Discussion (http://www.firearmstalk.com/forums/f26/)
-   -   Stevens 315 SxS (http://www.firearmstalk.com/forums/f26/stevens-315-sxs-13805/)

Guido 05-12-2009 03:13 PM

Stevens 315 SxS
 
I have a Stevens 315 SxS in 20ga. The schematic I got from Numrichs shows four available barrels in .410, 20ga, 16ga, and 12ga. It does not list part numbers for recievers.

That being said...
a) Is there reason why I could not swap a 12ga. barrel in palce of the 20ga?
b) Did each gauge have a different recievers?

Guido

falseharmonix 05-12-2009 09:46 PM

I was just doing some reading on my Mossberg 590, and I stumbled upon a part that slips into the barrel (receiver end) that will convert the current weapon from 12 ga to 20 ga, and a variety of other sizes. From what I understood the part (which looks like a choke tube) is the only thing that needs to be changed.

I'll see if I can find a link to what I'm talking about.

HOWEVER, I am not an expert on these matters and I would consult either a gunsmith and/or your manufacturer before trying anything.

Virginian 05-12-2009 11:10 PM

The short answer is you cannot change the gauge of your shotgun, either the Stevens or the Mossberg. They do make tubes that can slip into a break action gun, like the Stevens, but you could buy another gun for less than the cost of the tubes.


All times are GMT. The time now is 05:56 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.