I got it cleared. The bolt for some reason rotates at the extractor and it had rotated and was causing it to bind up cycles well just running shells through it but not sure how its going to work when shooting. I will try it again and see hopefully the was a one time thing. Ill will keep you all updated.
Here is the pic request from previous post.
Its not murder if for means of survival
Ok tanks. Looks like ill be buying a value pack at Walmart soon. And if the issue continues what can y'all say for savages customer service.
You just as well go one and polish the cylinder. All cheap shotgun ammo is steel cased and subject to hang in the cylinder. A short piece of 3/8" dowel and some steel wool will do the job. If you can't find a dowel you can get it done with a pencil. Try to find a heavy duty 1/2" drill to polish the cylinder. It's not that you will need the power. A 1/2" drill turns very slowly reducing the risk of something going wrong. Dollar tree sells steel wool that is in tube shaped roll that is perfect for polishing the cylinder on a shotgun.