New England firearms Pardner Model 12g. Issues. - Page 2
You are Unregistered, please register to use all of the features of FirearmsTalk.com!    
Firearm & Gun Forum - FireArmsTalk.com > Long Guns > General Shotgun Discussion > New England firearms Pardner Model 12g. Issues.

Reply
 
LinkBack Thread Tools Display Modes
Old 06-08-2012, 06:17 PM   #11
Feedback Score: 0 reviews
 
hiwall's Avatar
 
Join Date: May 2011
Location: Cleator,AZ
Posts: 3,554
Liked 835 Times on 536 Posts
Likes Given: 254

Default

If it does not pull the shell from the chamber then it is the extractor not the ejector. If the ejector is bad the shell would pull back and just not fly out. Your problem sounds like the extractor. First do like 303tom says to clean the chamber. The extractor should have a strong spring and a fairly sharp edge. Most extractors are strong enough to rip a chunk out of the case if the case sticks.
__________________
Just walking on the edge of of my grave.
hiwall is offline  
 
Reply With Quote
Old 06-08-2012, 09:39 PM   #12
Feedback Score: 0 reviews
 
xcoreyyyx's Avatar
 
Join Date: May 2012
Location: Maryland
Posts: 360
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by hiwall View Post
If it does not pull the shell from the chamber then it is the extractor not the ejector. If the ejector is bad the shell would pull back and just not fly out. Your problem sounds like the extractor. First do like 303tom says to clean the chamber. The extractor should have a strong spring and a fairly sharp edge. Most extractors are strong enough to rip a chunk out of the case if the case sticks.
^^
http://www.hr1871.com/documents/manuals/New/pardner-single-shot.pdf

#2 is the piece that is sticking and not ejecting the shell and the ejector spring (#3) is the spring that is very slightly bent.
xcoreyyyx is offline  
 
Reply With Quote
Old 06-08-2012, 10:36 PM   #13
Feedback Score: 0 reviews
 
hiwall's Avatar
 
Join Date: May 2011
Location: Cleator,AZ
Posts: 3,554
Liked 835 Times on 536 Posts
Likes Given: 254

Default

Sorry I was thinking it was a pump action(I gotta lay off the booze). With the spring removed does the ejector slide totally free with no drag? The shaft sometimes get burrs or a slight bend.
__________________
Just walking on the edge of of my grave.
hiwall is offline  
 
Reply With Quote
Old 06-08-2012, 10:45 PM   #14
Feedback Score: 0 reviews
 
xcoreyyyx's Avatar
 
Join Date: May 2012
Location: Maryland
Posts: 360
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by hiwall View Post
Sorry I was thinking it was a pump action(I gotta lay off the booze). With the spring removed does the ejector slide totally free with no drag? The shaft sometimes get burrs or a slight bend.
Lol, not a problem but the ejector slides out just fine. Like I said in an earlier post on this thread, it will eject a loaded shell and snapcaps just fine but after I fire the gun and go to eject it, the ejector doesn't slide out. I can sit around and just eject snapcaps and loaded shells all day long without a problem. Other people said they had problems with the low end shells expanding unevenly and getting stuck.
xcoreyyyx is offline  
 
Reply With Quote
Old 06-09-2012, 12:42 AM   #15
Feedback Score: 0 reviews
 
hiwall's Avatar
 
Join Date: May 2011
Location: Cleator,AZ
Posts: 3,554
Liked 835 Times on 536 Posts
Likes Given: 254

Default

Do your fired shells show bulges or marks? I don't really think its the spring as the fired shells should slide easily out of the chamber if everything is as it should be. When the ejector is pushed in all the way there should be no gaps. Metal should surround the cartridge completely.
__________________
Just walking on the edge of of my grave.
hiwall is offline  
 
Reply With Quote
Old 06-09-2012, 12:53 AM   #16
Feedback Score: 0 reviews
 
xcoreyyyx's Avatar
 
Join Date: May 2012
Location: Maryland
Posts: 360
Liked 2 Times on 2 Posts

Default

Metal surrounds the cartridge completely but people on the interwebz said that lower end shells expand unevenly which makes it get stuck. When I got it, it looked like it had practically never been fired before. I may check the ejector again. For some reason I do remember having slight difficulties of it being stuck and not just sliding out when it was taken apart.
xcoreyyyx is offline  
 
Reply With Quote
Old 06-09-2012, 01:42 AM   #17
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
303tom's Avatar
 
Join Date: Sep 2011
Location: Missouri
Posts: 4,365
Liked 1562 Times on 1060 Posts
Likes Given: 1698

Default

I still say you just need to clean the chamber real good...................
__________________
When all else fails.
303tom is offline  
 
Reply With Quote
Old 06-09-2012, 01:54 AM   #18
Feedback Score: 0 reviews
 
xcoreyyyx's Avatar
 
Join Date: May 2012
Location: Maryland
Posts: 360
Liked 2 Times on 2 Posts

Default

Quote:
Originally Posted by 303tom View Post
I still say you just need to clean the chamber real good...................
After I finish up dealing with what I have apart right now I am going to give the chamber a good cleaning. Probably later tonight.
xcoreyyyx is offline  
 
Reply With Quote
Old 06-09-2012, 04:51 AM   #19
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
303tom's Avatar
 
Join Date: Sep 2011
Location: Missouri
Posts: 4,365
Liked 1562 Times on 1060 Posts
Likes Given: 1698

Default

Run some real fine emery cloth on your finger around inside the chamber after you get all the gunk out...................and don`t get carried away.
__________________
When all else fails.
303tom is offline  
 
Reply With Quote
Old 06-09-2012, 05:08 AM   #20
Feedback Score: 0 reviews
 
xcoreyyyx's Avatar
 
Join Date: May 2012
Location: Maryland
Posts: 360
Liked 2 Times on 2 Posts

Default

Ok, I will do that. I will be taking it to the range this week seeing as how I can't just shoot out behind my house where I live
xcoreyyyx is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
Firearms in England and Wales lovelylife22 The Club House 2 02-02-2012 06:04 PM
Winchester Model 190 issues Jeehs .22 Rifle/Rimfire Discussion 1 04-15-2011 04:13 AM
Are "New England Firearms" shotguns any good? Schneiderman General Shotgun Discussion 26 12-07-2010 12:27 AM
New England Firearms Excell Auto frankmo13 General Shotgun Discussion 0 08-06-2010 02:13 PM
S&W Model 63 .22 revolver issues....??? chipster52284 Gunsmithing Forum 6 12-18-2009 10:57 PM



Newest Threads