Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   General Shotgun Discussion (http://www.firearmstalk.com/forums/f26/)
-   -   Need Help With Mounting Sling A Recoil Reduction (http://www.firearmstalk.com/forums/f26/need-help-mounting-sling-recoil-reduction-67531/)

ryevick 07-03-2012 06:25 AM

Need Help With Mounting Sling and Recoil Reduction
 
I bought the Interstate Arms Hawk Model 982 (Rem 870) shotgun along with the ProMag Grip & Stock Set and the BlackHawk Two Point Sling. It looks like the stock has a sling mount on it but how do I mount the barrel end? Here are the accessories for the 870 and it list different mounts. (Also a few mounts here.) What's the best way to mount it?

Also anything that may help reduce recoil such as a buffer or maybe even a better pad that would fit this stock (kinda wish I would've got this and a rail and grip for the front instead... still may if I can find them). Thanks!

chefbean43 07-04-2012 12:43 AM

To mount the sling on the barrel end you just have to purchase a new end cap for the magazine tube with the attachment point on it. I would post a link but im on my phone right now. Also i have the ATI 6 position stock on my 12 gauge and i love it

Gatoragn 07-04-2012 01:00 AM

The end cap on my 870 has a hole in it. The post on the sling swivel goes through the end cap and the locking device is applied on the inside of the cap.

Not sure about the end cap on an Interarms shotty. May have to either purchase a Remington end cap or drill a hole in the one that came with your shotgun.

ryevick 07-04-2012 03:15 AM

Quote:

Originally Posted by chefbean43 (Post 858004)
Also i have the ATI 6 position stock on my 12 gauge and i love it

I've decided to go with that one, I'll return the other one. How good is that recoil pad on the butt? Is it hard or soft rubber? I was thinking about maybe getting a Limbersaver if that pad isn't that great. Also, do you have a matching forend vertical grip, I'm looking for one of thos now too.

ryevick 07-04-2012 03:21 AM

Quote:

Originally Posted by Gatoragn (Post 858026)
The end cap on my 870 has a hole in it. The post on the sling swivel goes through the end cap and the locking device is applied on the inside of the cap.

Not sure about the end cap on an Interarms shotty. May have to either purchase a Remington end cap or drill a hole in the one that came with your shotgun.

I was thinking about the mount on this site that mounts a little different... and I'm thinking it may be better to have the weight being pulled from the side of the barrel instead of the tip.

oli700 07-04-2012 09:44 PM

here is a GG&G Sling Thing on a Laserlyte tri rail....
http://i45.photobucket.com/albums/f6...0/IMG_0304.jpg


All times are GMT. The time now is 07:16 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.