You are Unregistered, please register to use all of the features of!    
Firearm & Gun Forum - > Long Guns > General Shotgun Discussion >

mossberg 500 Question

LinkBack Thread Tools Display Modes
Old 11-18-2009, 11:41 AM   #11
Feedback Score: 0 reviews
Buddly's Avatar
Join Date: Nov 2009
Location: Lorain,Ohio
Posts: 2
Default Try a good game load first.

I'd try a good game load in it first. I've been hunting rabbits with my Mossy 500 20ga for years using the slug barrel (cylinder bore). I load 1oz #6 to 1300fps and the combo works great. Perhaps the cheap loads you are using are the problem and not the barrel.
Buddly is offline  
Reply With Quote
Old 11-18-2009, 03:48 PM   #12
Feedback Score: 0 reviews
masterPsmith's Avatar
Join Date: May 2009
Location: Barstow area, Kalifornia
Posts: 1,347
Liked 94 Times on 71 Posts
Likes Given: 25


Tools and measurements required for Rem-Choke installation.
12 gauge
Minimum barrel OD----.850".
Maximum barrel ID----.740"
Minimum barrel thickness after machining----.018"

The work can be done by hand, but is highly recemended to be done on a lathe and by a gunsmith familiar with choke tube installation.

masterPsmith is offline  
Reply With Quote

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
Mossberg Question ponsa019 General Shotgun Discussion 1 09-13-2009 05:13 PM
Mossberg 817 gloks4life .22 Rifle/Rimfire Discussion 2 09-13-2009 02:02 AM
Mossberg 46m? tomgodd .22 Rifle/Rimfire Discussion 4 08-16-2009 01:25 PM
Mossberg 500 al RyanT General Shotgun Discussion 1 05-26-2009 01:14 AM
new 100 atr mossberg kris General Rifle Discussion 6 09-12-2008 11:07 AM