Firearm & Gun Forum -

Firearm & Gun Forum - (
-   General Shotgun Discussion (
-   -   How do I pull the plug? (

ChesterCheeto 08-09-2007 04:06 PM

How do I pull the plug?
How do I pull the plug on my new Remington 870? Thanks

robocop10mm 08-09-2007 04:51 PM

Pull the plug
unload, unscrew the barrel nut (the one that holds the barrel on), use a screwdriver to gently pry out the steel insert (from inside the magazine tube) Be careful as the spring will jump out and dot your eye. Plug will come out with the spring.

Replace the spring, compress and reinstall the insert (you can use a screwdriver handle to gently tap it into position) replace the barrel nut, good to go.

Bidah 08-09-2007 11:22 PM

Mine must be different since you don't have to pry anything.

Remove the cap. Push in on the piece in there to clear the indentations, rotate 45 degrees, and then it will come out, under spring pressure.


robocop10mm 08-10-2007 12:36 PM

It depends on the model. Wingmaster or express.

All times are GMT. The time now is 10:42 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.