Ok well I might need a little more help. I cleaned the slide spring as well as the bolt and supports, hangers, lugs whatever you call em.
The problem is in the trigger assembly. I noticed the sear gets pushed down by force of the clambering or the shells going off.
Anyways when the sear goes down it doesn't mate with the hammer. I was able to manipulate the sear moving down and up with ascrewdriver behind it. I took the whole assembly apart and I didn't see any slack in the sear mount and the spring looked good. I think I might be missing a part that may go behind it. Problem is every pic off the internet of this gun assembly sucks. Blurry as hell