Firearm & Gun Forum -

Firearm & Gun Forum - (
-   General Shotgun Discussion (
-   -   12GA load velocity?? (

alex19ccc 08-27-2012 04:44 AM

12GA load velocity??
ok i know alot about shotguns...cuz thats the only thing i own.
but one thing i do NOT know much about is how the load weight affects the velocity. wich im not proud to admit.. but i need to know!

and heres why i ask. i like to buy a box of cheap birdshot & a box of steel BB's and make BB rounds out my birdshot to do some extra damage for the money spent... BUT the BB's being steel instead of lead...the round is noticeably lighter... i was wondering, since the load is now lighter.. will the velocity be increased? o.0

robocop10mm 08-27-2012 04:52 AM

Yes, the velocity will increase, will likely run into pressure problems. Possibly catastrophic pressure problems. Steel shot requires diferent loadings with different wads because steel does not compress like lead shot does. Upon firing the lead shot will deform against each other (slightly) allowing a smooth pressure curve. The steel shot will not have that effect and pressures can spike to dangerous levels.

"Playing" with loads like you are planning on can and likely will end very badly for both you and your favorite shotgun.

Steel shot (BB's) may yield high initial velocity but will lose velocity more rapidly down range and does not penetrate as deep as dense material like lead. You will probably end up with most of the damage to you and your gun.

alex19ccc 08-27-2012 04:58 AM

i see what your saying. and im not trying to discredit you..but im not "planning" on doint it, ive been loading empty shells for about a year...with LOTS of different things...(nothing that can be too dangerous)
but ive shot hundreds of these homemade loads...using the same gun.. so far no damage to me or my barrel :P

kytowboater 08-27-2012 05:22 AM

It's bound to happen. Over time of excessive pressure, the metal WILL weaken. Then, boom. Just hope no one gets hurt. Look up loading data for steel shot loads. Be safe.....

alex19ccc 08-27-2012 05:35 AM

so what your saying is.. that the steel bb's that have no give are causing extra pressure on the inside of the chamber? i can understand that.. but enough extra pressure to actually bust it?? i mean..thats some pretty thick steel there o.o

in all honesty, i most likely wont do it any more.. mainly cuz it takes to much time to load those things... grrrr why cant buckshot be as cheap as birdshot :/
it seems like ammo goes up by 1$ every time i visit the shop!

kytowboater 08-27-2012 05:39 AM

Shot shells are more prone to over pressure. Go by the book and your fine, as long as you dont deviate from published, tried data. It's there for that purpose.

All times are GMT. The time now is 07:43 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.