12GA FH- Hairy Shotgun/Rifle- - Page 11
Firearm & Gun Forum - FireArmsTalk.com > Long Guns > General Shotgun Discussion > 12GA FH- Hairy Shotgun/Rifle-

Reply
 
LinkBack Thread Tools Display Modes
Old 03-29-2010, 04:59 AM   #101
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

We have put 4 different cartridges in the Savage 210
bolt gun. We added various 12ga and .700"
heavy thick barrels.
The first was our 12ga FH long case.
The second was my 700H 3.25" belted case.
Third was the 3.5" 12ga that Bret did, and
fourth is the 700NE that we wanted to see
how it works. It shoots fine, has weighted stock,
and a 27 inch barrel.Has a double thick pad.
I even have cast slugs for 700.
Cases are expensive, ones in picture are
20 bucks each...Ed

__________________
hubel458 is offline  
 
Reply With Quote
Old 04-03-2010, 05:45 AM   #102
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

Here is picture of my Mossy 695 that has heavy barrel for
the our long 12ga cases, in fact it chambers the 12ga
belted shown in picture ok that I use for testing.
I set chamber to do belted as well as rimmed.

Second picture is some of my 585 Short HE cases, that work
great in regular length actions.We have these in Ruger,
Enfields, Mausers already. I have available supply of
brass for these of about 8-9000. Ed



__________________
hubel458 is offline  
 
Reply With Quote
Old 04-12-2010, 05:51 AM   #103
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

Getting to some more 4ga/bore work.With barrel and
falling block action locked down fired off some blank
type loads to test the breach and firing pin I set up.
I fired it by hitting the back of firing pin with a rod,
as I now have get hammer and trigger setup. Firing pin
dents primers ok, breach works and headspace is ok.

For loads I have wads to take up space above powder.
Others with same 4ga case in doubles fill case about
1/6 full of Blue Dot (110gr), with 2000gr slug.

I'll use 1600 gr hollowbase slugs, with about 1/3 of a case
of IMR 4759 or 1/2 to 5/8 case of RE17, rest filled
with fiber wads.These are shotgun primer loads and I will be
using THE STRONGER PRIMERS OF KILN CASES at about same
price as BMG primers. And I have BMG primer cases also
that I will test also, once gun is finished in a few weeks.Ed

__________________
hubel458 is offline  
 
Reply With Quote
Old 04-22-2010, 05:00 AM   #104
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

Fired 4bore with 760 gr light round ball with
fiber wads under it, using 150gr Blue Dot
and shotgun primer case. Just starting loads
for testing operation. Hardly no recoil,
like a heavy, beefed up blank load,
could go much higher with that light
of round ball. Will have pics of the muzzle
blast and the gun shooting from the side,
using heavier slugs in a week or so.
In Owen's 4bore double,that uses same case
size they use max of 110gr of Blue Dot
with 2000 gr slug. Ed

__________________
hubel458 is offline  
 
Reply With Quote
Old 04-25-2010, 04:33 AM   #105
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

Fired the 4bore with the 760 gr round ball,
which is a hard rubber coated steel ball,
thus the light weight compared to lead,
using 100gr of Blue Dot under 300gr RE17,
total 400gr. Hairy load, with 3500 fps, and
20,000 ft lbs. Used the turned 4bore cases,
with shotgun primers, and with that light
projectile case doesn't need sizing. This is
good beginning bullet weight for early testing.
I am gonna do 1200gr and 1600gr holding the
speeds to give about same energy.
I won't load heavier until I get another
stock like one I have that is full width.
Also those who want 3.5" 20ga brass cases,
Rocky Mtn Cartridge is making them now.ED

__________________
hubel458 is offline  
 
Reply With Quote
Old 05-01-2010, 04:45 AM   #106
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

Tested 4bore with a double ball load of 1250 grains weight,
Used 100gr Blue Dot under 250gr of RE17, with card and
one fiber wad. 2600 fps. Recoil not bad, just brisk.
Used turned brass cases with shotgun primer, and cases
still didn't expand base. just size top..
Running about 23-25,000 psi.
The light ball load in above post
about 16,000 psi.. Ed

__________________
hubel458 is offline  
 
Reply With Quote
Old 05-06-2010, 04:20 AM   #107
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

Some interesting shooting with 4bore.

Double 760gr ball load of 1520 gr total, at 2300 fps.

A buck and ball load, 6 45cal lead balls, 133gr each,
and a 760 gr ball on top, 1560 gr total, at 2300 fps.

Both loads 100gr BlueDot under 225gr Re17, In the
turned brass cases, with shotgun primer.Recoil
manageable, and like a big push. The sound isn't
a boom like regular shotguns, but cracks loud
like big bore rifles,at least twice as as loud.Ed

__________________
hubel458 is offline  
 
Reply With Quote
Old 05-13-2010, 06:12 AM   #108
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

I got my 20ga FH 3.5" brass cases from RMC.
The case capacity in water is 234 gr.
It holds 215 gr of dense ball powder to the
base of 490gr 20ga hard lead slugs I have.
These cases use a 209Mag shotgun primer, and
I have mouth ID set up for .620 slugs as the slugs
and sabots I have are that size. These cases will
work good out to 35,000 psi, without extreme
expansion or resizing problems. Load of slow powder
will get 490 gr to 2500 plus at 25-27,000 psi,
6800 ft lbs, using the 30" barrel I'm getting to
put on the FBW Model L falling block.
! also have a case of the 3.5" factory Hastings
SPW, locked on sabot, loaded rounds to use.Ed

__________________
hubel458 is offline  
 
Reply With Quote
Old 05-22-2010, 04:27 AM   #109
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

Here is pic of the RMC brass 20ga 3.5" with
Hastings 3.5" factory plastic case loads,
and 20ga Hollywood dies. Also slugs, Dixie 490 gr,
Hastings SPW and 900gr jacketed in the one case.

Second pic is the FBW Model L setup that will have
20ga 3.5" chambered barrel in a second one. This 1st
one is in my 585HE.It is falling block in one piece
thumbhole stock, an idea I come up with on my
4bore falling block. Second Model L will be built same
in 3.5" 20ga. EDd



__________________
hubel458 is offline  
 
Reply With Quote
Old 05-25-2010, 03:57 AM   #110
Feedback Score: 0 reviews
 
Join Date: Jul 2008
Posts: 251
Liked 12 Times on 10 Posts

Default

Transition, biggest to a smaller, in
putting falling block actions in one piece stocks.
First one was the 4bore, the big one in
picture and after it was done I got a FBW falling block
and soon figured out I could do the same with it.
It is chambered in my 585HE cartridge.
And it is pictured above with the cases.
I built the 4bore, from blocks of steel.
The FBW is the Model L, and I'm doing second one
in 3.5" 20ga, to use brass and plastic cases.
And maybe later on when I find extra 700 barrel
we'll do my long 700HE in FBW....Ed

__________________
hubel458 is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
1800's rifle & shotgun PineKnot Blackpowder & Musket 4 02-21-2012 11:34 PM