Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Auto & Semi-Auto Discussion (http://www.firearmstalk.com/forums/f25/)
-   -   Saiga or AK? (http://www.firearmstalk.com/forums/f25/saiga-ak-1770/)

cnorman18 08-21-2007 05:02 PM

Saiga or AK?
 
OK, I'm going to go with 7.62 Russian instead of .308. The vote on the other thread is unanimous, and the reasoning makes sense to me.

Next question: Saiga sporter or straight-up AK? Advantages, disadvantages? Prices seem to be comparable. Saiga is Russian-made, while the AKs seem to be Romanian or ?. What should I watch out for? Is there really any advantage to a milled or heavy-duty (1.6 mm) receiver in an AK?

RMTactical 08-21-2007 06:26 PM

Saiga's "quality" and accuracy beats anything else in it's price range, but without the conversions done, you cannot use 30 round mags and you don't have a pistol grip.

What matters the most to you?

robocop10mm 08-21-2007 06:39 PM

saiga or AK
 
I am going through a quandry about an AK. I have a Saiga 12 ga but want an AK in 7.62 X 39.

It has been presented to me the WASR's are suspect, the Yugo's are not chrome lined, The Chinese are ok as are the Maadi's, the Polish AK's seem to the best available right now.

I'm looking at a Polish underfolder and a Yugo M-76 HB with drums for static defense.

ranger_sxt 08-21-2007 09:35 PM

Quote:

Originally Posted by cnorman18 (Post 6963)
Next question: Saiga sporter or straight-up AK? Advantages, disadvantages? Prices seem to be comparable. Saiga is Russian-made, while the AKs seem to be Romanian or ?. What should I watch out for? Is there really any advantage to a milled or heavy-duty (1.6 mm) receiver in an AK?

There is no reason to go to a milled or heavy-duty receiver. The only reason the Russians made them that way originally was they didn't have the technology for mass-producing the stamped receivers.

Quote:

Originally Posted by robocop10mm (Post 6968)
I am going through a quandry about an AK. I have a Saiga 12 ga but want an AK in 7.62 X 39.

It has been presented to me the WASR's are suspect, the Yugo's are not chrome lined, The Chinese are ok as are the Maadi's, the Polish AK's seem to the best available right now.

I'm looking at a Polish underfolder and a Yugo M-76 HB with drums for static defense.

Unless you are shooting corrosive ammo, which is damned hard to find anymore, don't worry about chrome-lining an AK barrel.

Bum454ss 01-20-2008 03:23 AM

Saiga upgrades
 
Quote:

Originally Posted by RMTactical (Post 6966)
Saiga's "quality" and accuracy beats anything else in it's price range, but without the conversions done, you cannot use 30 round mags and you don't have a pistol grip.

What matters the most to you?

Just FYI... I've spent alot of time researching accesories for the saiga 7.62 and have found several site's that you can purchase HI-Cap mags and Izsmash? saiga OEM pistol grips, folding stocks and many other saiga upgrades. Their prices seem to be resonable at least to what we see for the AK. I will purchasing my first saiga very soon. Not sure of the rules here for posting links but here it is.

http://www.rusmilitary.com/html/c-deact_furniture.htm

hkusp45 04-01-2008 05:18 PM

go to the saiga forum for any saiga related questions and you can get 30 rounders for the saiga rifle. If you want a straight up ak then visit vector arms for a quality fair priced product!

CodyWalkerJr 02-07-2009 01:27 AM

you CAN modify an ak clip to work in the saiga 7.62 w/o messing with the rifle
 
im new here but just to let you guys know i purchased a saiga 7.62 thinking that it was interchangeable with ak parts.when the 30 rd. ak clip wouldnt cycle the rounds{but it DID fit in the rifle} i decided to make it work.i didnt want to install a bullet guide and possibly damage the gun, so i compared the 10 rd. that came with the rifle and the ak magazine. the only difference is there is a little u shaped lip in the front top of the ak mag where the saiga mags are flat(where the point of the bullet sticks out) ...im no gunsmith but i have access to a mig welder at work. i took a 12 mm wrench depressed it in the mag to hold down bullet feed,shoved a wet rag in there {to keep the plastic part cool} and tacked a few welds on VERY low volts (15 or 16 volts) to build that lip up until it was level and looked similar to the saiga mag then about 10 minutes with my dremel smoothing it out and cleaning up any extra weld and i tried it....i put 30 rounds in and each round cycled properly.i know this may be over kill but the saiga 30 rd mags are hard to come by, and expensive so if you are handy and desperate you can try it be careful not to burn a hole and obviosly get a metal milsurp clip not plastic
hope i can help any confused saiga owners


All times are GMT. The time now is 08:00 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.