Firearm & Gun Forum -

Firearm & Gun Forum - (
-   Auto & Semi-Auto Discussion (
-   -   GSG-5 failure to feed (

gatorwerks 05-03-2012 04:27 AM

GSG-5 failure to feed
Has anyone ever seen a GSG-5 that won't feed; where the round is stuck after 1/4 inch is chambered? Yes, it does say 22LR on the upper receiver and the chamber and rifling is and unobstructed and clean. My friend and owner claims it used to feed problem free. I'm baffled and seeking ideas!

Mosin 05-03-2012 11:48 PM

Lots of dry fires can cause the firing 'pin' to put a ding where the round feeds, causing the problem you described. A dremel fixed it for me. mandatory disclaimer. Don't take power tools blah blah blah. I did it because it's only a .22 and I'm confident I could fix it. I deburred the edge of the chamber, then polished the inside where the round enters with some jewelers rouge. Look at it, you might be able to see the ding from the firing pin strikes. Also had the same issue with my 597, fixed it the same way.

All times are GMT. The time now is 07:02 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.