Firearm & Gun Forum - FireArmsTalk.com > General Firearms Forums > Blackpowder & Musket > Questions?

Reply
 
LinkBack Thread Tools Display Modes
Old 06-06-2007, 04:37 PM   #1
Feedback Score: 0 reviews
 
Join Date: Jun 2007
Posts: 5
Default Questions?

I recently bought an Uberti Remington New Army forged and I do love it but I have some concerns. Maybe it is just me, that I am overly worried about my new "toy" but these are my questions:

I have used both CCI. 10 and 11 caps. With a cap loader if I press down hard it will secure the .10's and if I crimp the .11's the same. The problem is I have two cylinders that I have to actually hit with the hammer twice before they fire. I don't know if it is the nipples or what. I have no issue with sending off to Taylor & Co. for new ones, but just wondered if anyone else had the same issue.

Also, there is a grove being cut slightly into the cylinder. A friend of mine told me not to be concerned that even his ruger .38 has that issue. There is also a slight play in the cylinder. even at full cock. I just noticed this. I don't know the tolerance or have a clue how to measure it. The nipple for the most part still stays in striking area of the hammer and the loading lever always slides easily into the chamber at full cock. When I say slight, I do mean slight but like I said, I do not know how to measure the tolerance or what it even should be at. A friend of mine said his ruger does the same and not to worry.



__________________
Heart-ShapedGlasses is offline  
 
Reply With Quote

Join FirearmsTalk.com Today - It's Free!

Are you a firearms enthusiast? Then we hope you will join the community. You will gain access to post, create threads, private message, upload images, join groups and more.

Firearms Talk is owned and operated by fellow firearms enthusiasts. We strive to offer a non-commercial community to learn and share information.

Join FirearmsTalk.com Today! - Click Here


Old 06-15-2007, 07:37 PM   #2
Feedback Score: 0 reviews
 
Join Date: May 2007
Posts: 260
Default C&B

the mark is normal on factory guns. a custom worked on gun will not have that mark.its the timing.C&Bs need a litle slop so they will work when the build up of residue takes place.carefull you do not damage the priming compound in the cap.if it breaks up you will get missfires or duds.

__________________
WILDCATT is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
2 PPK/S questions 172pilot Semi-Auto Handguns 3 03-29-2009 05:19 PM
AR-15 5.56 Questions rcb AR-15 Discussion 10 11-02-2008 08:42 AM
Questions about the XD .40 SnW fragout XD Forum 11 10-12-2008 05:16 PM
6.8 SPC Questions crossfire The Club House 1 11-29-2007 01:21 PM
AR-10 Questions EHCRain10 AR-15 Discussion 5 11-08-2007 03:41 PM