Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Blackpowder & Musket (http://www.firearmstalk.com/forums/f22/)
-   -   Nipple Wrench for RDstrain49 (http://www.firearmstalk.com/forums/f22/nipple-wrench-rdstrain49-57310/)

KAB 02-08-2012 11:07 PM

Nipple Wrench for RDstrain49
 
After going through a few messed up cheap Italian Nipple Wrenches , cussing , screaming , and refusing to pay more money for the expensive Ratchet Style they sell , years ago I decided American Inginuity is going to rule my life , not Market Shares .
So , I started making my own out of Craftsmen 1/4" sockets and a good socket wrench . I cut slot with a Dremel cutting blade and finished with a file to fit perfectly .
These will crank off any stuck nipple and make my life EASY-ER :D
I use the extension to start the nipple , even with greasy fingers , this is the way to go . I recently discovered on my Pocket Navy Colt the nipples are the same exact size as the 1851 Navy but the cylinder is tighter around the nipple , requiring me to nutt up last night and make another socket for the task of one revolver . I did not have my Moto-Tool last night , its stuck on a job , so I hand filed this into submission and it fits EXACT . Sweet system too works great , you should try it ;) But , I highly recommend a Moto-Tool for the first part of the job , the hand filing took me an hour and a quarter without it . But then again , I am a danged determined man :D

http://i270.photobucket.com/albums/j...rtiNavy017.jpg
http://i270.photobucket.com/albums/j...rtiNavy019.jpg
http://i270.photobucket.com/albums/j...rtiNavy018.jpg

There ya go RD , neccessity is the creator of invention . :)

Don't mess with a man and his plan :D

rdstrain49 02-08-2012 11:24 PM

Looks like I'm going to have to try that. Guess I could turn the diameter in the drill press. Thanks. Should have a range report on my little shooter if it ever quits snowing.

KAB 02-08-2012 11:59 PM

Snow !
 
Quote:

Originally Posted by rdstrain49 (Post 703111)
Looks like I'm going to have to try that. Guess I could turn the diameter in the drill press. Thanks. Should have a range report on my little shooter if it ever quits snowing.

You keep your snow in your part of the country ok RD , LOL , I have had enough of it thanks :D
Whatever socket size you use , just make sure the inside of the socket will fit over the nipple pretty much exactly , I think I used a 1/4" drive socket that was 5/32nds ? Drill press is a great idea ;) A file held to it or emery cloth to get the thickeness just right, yup , great idea there RD .
Should be interesting compairing notes on this Pocket Navy with the both of us shooting the same revolver and different loads . We are most likely going this next week and will take pics this time too . I swapped out nipples with one of my other Ubertis till my Tressos arrive . Being my gun , for my wife , it has to run right for her . She is a new shooter so the experience must be a pleasant one . She didn't get too bummed with it jamming caps , but messing with a stuck action with the other cylinders loaded live is never a good thing at the Range . But I think this problem will be a MUTE point soon :D
I don't think there is a more beautiful sight than watching your wife enjoy your sport for the first time and telling you what a great time this is and now I get it and why you do it honey :D .....Hell Yes !
Enjoy RD , will chat soon , KAB out

rdstrain49 02-09-2012 07:20 PM

KAB
There is no such thing as a 5/32" socket in Custer SD. I settled on a 3/16" deep socket. Used a die grinder with a cutoff wheel to notch the file lines, cut the notch for the shoulder of the nipple. Chucked the socket in the drill press, then used the die grinder with an abrasive wheel to turn the outside diameter to fit the cylinder recess. Dressed it with fine emery cloth. End result, looks factory made, works better than any nipple wrench I've ever had. Total time about 15 min. Great idea, thanks.

Now if the wind will die down a bit, I'll have a range report.

KAB 02-09-2012 09:56 PM

Ok
 
Quote:

Originally Posted by rdstrain49 (Post 703861)
KAB
There is no such thing as a 5/32" socket in Custer SD. I settled on a 3/16" deep socket. Used a die grinder with a cutoff wheel to notch the file lines, cut the notch for the shoulder of the nipple. Chucked the socket in the drill press, then used the die grinder with an abrasive wheel to turn the outside diameter to fit the cylinder recess. Dressed it with fine emery cloth. End result, looks factory made, works better than any nipple wrench I've ever had. Total time about 15 min. Great idea, thanks.

Now if the wind will die down a bit, I'll have a range report.

Ok RD , you know how this works , I want to see the pics , LOL .....
Factory made , man , your gonna make my Redneck work look pretty bad arent you ! :D
I posted this recipe on Cass 10 years ago for those wrenches and nobody took me serious , now you come along and prove it to be a fact its the greatest thing since the Bikini :D
Cheerios RD ;)

KAB 02-09-2012 10:01 PM

Oh , and RD , I want CLOSE-UPS too , LOL :D

rdstrain49 02-09-2012 10:41 PM

OK Close ups it is/are/was whatever.

http://i944.photobucket.com/albums/a...9/IMG_0854.jpg

http://i944.photobucket.com/albums/a...9/IMG_0855.jpg

rdstrain49 02-09-2012 10:44 PM

Now for the range report. None of the 5 chambers will fire. Looks like the well for the nipples was drilled a bit too deep. Even swapped nipples with the '51 Navy. No luck. Now if I can just find a washer that is 5mm ID x 8mm OD I'll be in business.

KAB 02-10-2012 12:57 AM

Well , aint that sumtin !
 
Quote:

Originally Posted by rdstrain49 (Post 704007)
Now for the range report. None of the 5 chambers will fire. Looks like the well for the nipples was drilled a bit too deep. Even swapped nipples with the '51 Navy. No luck. Now if I can just find a washer that is 5mm ID x 8mm OD I'll be in business.

Wow RD, beautiful work :D
Well , sounds like a trip to your local NUT and BOLT palace to me . We have one here , but that dont help you . Looks to me by your fabrication skills , you can make your own washers :D
I swear Tony in Italy must have been out drinking wine for lunch and forgot to check the Mill Depth prior to boring those holes , crap Batman , no dang good !:mad:
You'll figure it out :)

rdstrain49 02-10-2012 01:11 AM

So far the only way I have found to get the right size washer is to have them custom made. Minimum order 100, price per each $1.95 + shipping. I think not. Can't modify a washer that is close, the three mm width of the finished washer is just too thin to work with. My armorers background has got me thinking outside the box if I can't find the correct size washer. I will get the little shooter running yet. It's not a problem, just another challenge to be met and overcome.


All times are GMT. The time now is 05:01 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.