Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   Blackpowder & Musket (http://www.firearmstalk.com/forums/f22/)
-   -   1858 New Army Stainless Steel Revolver with Conversion Cylinder (http://www.firearmstalk.com/forums/f22/1858-new-army-stainless-steel-revolver-conversion-cylinder-31891/)

mesinge2 09-18-2010 06:51 PM

1858 New Army Stainless Steel Revolver with Conversion Cylinder
 
I have a brass frame 1858 clone that has been great to shoot.
But I have been looking at the 45 Colt Conversion cylinders and I have read that you need a Stainless steel frame.
Now, whether that is true or not I have always wanted a Stainless 1858, so why not.

What is the difference between the following two cylinders and will either of them fit on the below 1858 New Army?


Howell's Old West Conversions Drop-In Conversion Cylinder 44 Caliber Uberti 1858 Remington Steel Frame Black Powder Revolver 45 Colt (Long Colt) 6-Round Stainless Steel - MidwayUSA


Howell's Old West Conversions Drop-In Conversion Cylinder 44 Caliber Pietta 1858 Remington Steel Frame Black Powder Revolver 45 Colt (Long Colt) 6-Round Stainless Steel - MidwayUSA


Cabela's -- 1858 New Army Stainless Steel Revolver with 5-1/2" Barrel

theicemanmpls 09-18-2010 08:06 PM

Midway has been known for high prices. A cylinder for almost $300? You can almost purchase a .45 SAA from Ruger for that. I wouldn't bother unless you have money to burn.

BTW, I own both, cap and ball, and SAA's.

Why bother with a $300. ad on, when you can get an entire pistol for not much more?

TXnorton 09-18-2010 08:07 PM

The brass framed BP revolvers are not as strong as steel. I don't know why they would specify stainless though.

My .44 cal Walker Colt shoots .454" diameter round balls.

mesinge2 09-18-2010 09:11 PM

Quote:

Why bother with a $300. ad on, when you can get an entire pistol for not much more?
I know I could own a Ruger SA for less but I love the look of the 1858, but I want cartridges.

GNLaFrance 09-18-2010 09:21 PM

Quote:

Originally Posted by mesinge2 (Post 352919)
But I have been looking at the 45 Colt Conversion cylinders and I have read that you need a Stainless steel frame.

No, you need a steel frame, but it doesn't have to be stainless. The Howell (formerly R&D) cartridge conversion cylinders come in blued steel to match blued revolvers, and in nickle plated steel to match stainless revolvers.

Quote:

Originally Posted by mesinge2 (Post 352919)
What is the difference between the following two cylinders and will either of them fit on the below 1858 New Army?

One will fit Uberti revolvers and the other will fit Pietta revolvers. Which one you get depends on who made the revolver.

Quote:

Originally Posted by mesinge2 (Post 352919)
How can the 45 colt bullet with a .452 diameter could work in a .44 barrel?

.44 percussion revolvers have .451 inch bores. Don't ask me why, I didn't design them.

mesinge2 09-18-2010 09:48 PM

Thanks for the help guys.
I looked on Uberti's site and I think I am going to buy the Uberti stainless 1858 8" and buy the Blued Cylinder for a two tone look.


All times are GMT. The time now is 12:54 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.