Firearm & Gun Forum -

Firearm & Gun Forum - (
-   .22 Rifle/Rimfire Discussion (
-   -   Trigger on a m60 (

jjfuller1 02-13-2013 09:48 PM

Trigger on a m60
Are there much for upgrades or does it need to go to a gunsmith to be real smooth and crisp? Right now it feels a bit strong and long

Spud9 02-14-2013 01:19 AM

Look up KAT trigger by Arrowdodger or google Mcarbo spring kit. KAT is the ultimate way to go....

dteed4094 02-16-2013 08:28 PM

there are a couple DIY fixes on Rimfire Central

big shrek 02-17-2013 02:27 AM

I've done several DIP triggers/guards on my rifles...latest was the Pink one for my Wifey's Marlin 60...

But FIRST, before doing anything else...clean the bejeebers out of it.

Remove from rifle.
Totally dissassemble it, removing all pins and springs, and the trigger itself.
Clean it with pipe cleaners & q-tips...and a toothbrush if needed.
Polish the front of the "P" portion of the trigger...
Re-assemble in reverse of how you took it apart.

NOTE: those pins can get hardcore stuck, I've had to soak overnight in WD-40 to get 'em out...
the older they are, the more rust & grit accumulate in the pins...
if you don't have a proper punch set, this would be the time to go to Harbor Freight and get

Why I love DIP trigger guards & triggers...
1. They are aluminium. Unlike the plastic or pot metal ones that the MFR provided, will not break, melt, or otherwise crumble.
2. They have threaded screw-pins, unlike the punch-pins you just took out, are EASY to remove & replace for cleaning.
3. "P" adjustment screw removes disconnecter pre-travel, also utilizes a smaller contact surface for less drag.
4. Overtravel screw reduces...overtravel.
5. 3/8" wide trigger gives better finger contact and better fulcrum angle for an easier trigger pull.
6. Add in lighter springs (homemade or MCARBO) for an even better feel!!

I've polished enough old rusty Marlins to get to the point where I'd rather buy the trigger/guard combo...its worth every penny :)

shouldazagged 02-17-2013 03:06 AM

I'd pay a good smith to do a trigger and action job. In fact, I did, and my Model 640 has a very nice trigger, smooth and crisp, about eight pounds but feels like less. I preferred not to risk screwing it up myself and then having to pay a smith anyway. What I got was well worth the money.

Spud9 02-17-2013 01:43 PM

I do marlin triggers down to around 3.5 lbs but for around the same price Arrowdodger's KAT is the way to go on Marlins. I am getting ready to send him one of mine to do. With his trigger and my work on the hammer my pull should be around 2 lbs or less.

mrt8110 02-17-2013 03:35 PM

Glad to see you posting big shrek. Cliff

All times are GMT. The time now is 04:20 AM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.