[ali_c76]

I have a Squires Bingham 20P that will not fire the second shell.. anyone have experience with this gun... any thoughts... ?? Thanks

[wolfdog]

I have one and have not had any problems, have you taken it down and cleaned it completly?

[ali_c76]

Yes... I took it apart and cleaned it (did not take off the trigger assembly though because it seemed fairly involved to take it off) cleaned as best as I could with no improvement. One other thing I should mention the trigger on it is broken (back of trigger which butts up against safety if broken off) causing it to fire on safe. Do you think this may also be the source of the firing problem??

[big shrek]

Originally Posted by ali_c76

Yes... I took it apart and cleaned it (did not take off the trigger assembly though because it seemed fairly involved to take it off) cleaned as best as I could with no improvement. One other thing I should mention the trigger on it is broken (back of trigger which butts up against safety if broken off) causing it to fire on safe. Do you think this may also be the source of the firing problem??

Yep.

Probably need new springs as well, just for good measure.

What most folks don't know is that Squires-Bingham is now known as ARMSCOR.
Here's where to find parts.
Firearm Parts and Accessories | Numrich Gun Parts Corp. | e-GunParts.com

You can also order parts directly from ARMSCOR...but be prepared for some shipping charges, since they are in the Phillipine Islands.

[ali_c76]

thanks big_shrek for the info I am going to try a new trigger and springs...