Firearm & Gun Forum - FireArmsTalk.com > Long Guns > .22 Rifle/Rimfire Discussion > savage model 62

Reply
 
LinkBack Thread Tools Display Modes
Old 11-28-2012, 06:12 AM   #11
Feedback Score: 0 reviews
 
Zschneider's Avatar
 
Join Date: Nov 2012
Location: Washingtion state
Posts: 143
Liked 40 Times on 29 Posts
Likes Given: 1

Default

I don't know how this is my first gun

__________________
Zschneider is offline  
 
Reply With Quote
Old 11-28-2012, 06:13 AM   #12
Feedback Score: 0 reviews
 
Join Date: Feb 2011
Location: West, by God, Funroe,Louisiana
Posts: 18,707
Liked 9199 Times on 5056 Posts
Likes Given: 74

Default

Okay, see if you can reproduce the failure, and take a good close up pic.

I'll check back with you in the morning. I gotta go to bed so I can get junior off to school in the morning.

__________________
trip286 is offline  
 
Reply With Quote
Old 11-28-2012, 06:14 AM   #13
Feedback Score: 0 reviews
 
Join Date: Feb 2011
Location: West, by God, Funroe,Louisiana
Posts: 18,707
Liked 9199 Times on 5056 Posts
Likes Given: 74

Default

And I'll post you a step by step picture tutorial on taking it down for cleaning.

__________________
trip286 is offline  
 
Reply With Quote
Old 11-28-2012, 06:14 AM   #14
Feedback Score: 0 reviews
 
Zschneider's Avatar
 
Join Date: Nov 2012
Location: Washingtion state
Posts: 143
Liked 40 Times on 29 Posts
Likes Given: 1

Default

Alright I will try to

__________________
Zschneider is offline  
 
Reply With Quote
Old 11-28-2012, 06:14 AM   #15
Feedback Score: 0 reviews
 
Join Date: Sep 2011
Location: fordland,missouri
Posts: 11,099
Liked 862 Times on 648 Posts
Likes Given: 1

Default

Ill also help you if you can tell me what's happening wheb it messes up.

__________________
Marlinman is offline  
 
Reply With Quote
Old 11-28-2012, 03:49 PM   #16
Feedback Score: 0 reviews
 
Join Date: Feb 2011
Location: West, by God, Funroe,Louisiana
Posts: 18,707
Liked 9199 Times on 5056 Posts
Likes Given: 74

Default

What you'll need...
9/64 allen wrench. Also known as allen key, hex wrench, hex head...
phillips and flat head screwdrivers
And for me, my 11MM wrench. I say "for me" because this particular wrench is NOT 11MM. I don't really know what size it is. It's a cheap pakistani wrench, and the whole set were sized improperly. Very few of them in this set fit ANYTHING. You may have to use trial and error, or an adjustable wrench.

__________________
trip286 is offline  
 
Reply With Quote
Old 11-28-2012, 04:00 PM   #17
Feedback Score: 0 reviews
 
Join Date: Feb 2011
Location: West, by God, Funroe,Louisiana
Posts: 18,707
Liked 9199 Times on 5056 Posts
Likes Given: 74

Default

You'll also need your rifle. Maybe a little superhero supervision. I don't know. He may just be threatening. He tried to stare me down earlier too... and he won...

NOTE: SAFETY FIRST!!!!!
Make sure the rifle is clear of any and all live ammo. In fact, since this is your first rifle, put the ammo in another room. Remove the magazine FIRST. Lock the bolt to the rear by pulling the charging handle to the rear and pressing it into it's locking notch. Visually, AND PHYSICALLY, inspect the chamber. Use a pencil tip if you need to. People who fail to PHYSICALLY inspect the chamber sometimes have been known to become complacent, and sometimes have a negligent discharge as a result. PHYSICALLY inspect by inserting a foreign object (preferably a finger, but I doubt you can get your finger into this rifle), and making sure that there is NO LIVE AMMO in the chamber.
This sounds ridiculously redundant, I know. But, redundancy keeps holes where they belong - Downrange, and not inside the house, a foot, or a family member.

You want to remove the single screw in the bottom of the stock, just forward of the magazine well, using your Allen wrench (hex).

20121128_100504.jpg   20121128_100655.jpg  
__________________

Last edited by trip286; 11-28-2012 at 05:02 PM.
trip286 is offline  
 
Reply With Quote
Old 11-28-2012, 04:08 PM   #18
Feedback Score: 0 reviews
 
Join Date: Feb 2011
Location: West, by God, Funroe,Louisiana
Posts: 18,707
Liked 9199 Times on 5056 Posts
Likes Given: 74

Default

Remove the stock. There is no super secret trick. I grab the barrel in one hand, the forearm of the stock in the other, and pull apart.

Remove these two screws holding the magazine well to the receiver.

And then the one to the rear of the trigger group.

Lift off the mag well, then lift off the trigger group.

Edit to add: I wouldn't attempt to disassemble the trigger group. Many small parts. Just liberally flush it with cleaning solvent, scrub as well as you can, and lubricate.

20121128_100751.jpg   20121128_100759.jpg   20121128_101419.jpg  
__________________

Last edited by trip286; 11-28-2012 at 05:05 PM.
trip286 is offline  
 
Reply With Quote
Old 11-28-2012, 04:15 PM   #19
Feedback Score: 0 reviews
 
Join Date: Feb 2011
Location: West, by God, Funroe,Louisiana
Posts: 18,707
Liked 9199 Times on 5056 Posts
Likes Given: 74

Default

See this nut? Take it off. Then take off it's little bracket. Pull the barrel from the receiver. See that flat piece of metal sticking out from the rear of the barrel? That's the ejector, not to be confused with EXTRACTOR. The extractor is semi permanently attached to the bolt with a roll pin. The extractor pulls the spent casing from the chamber, and the ejector spits it out of the rifle.

You can pry the ejector away from the barrel with only your hand, but you'll have to tap it back into place when you put it back together. It's kind of crimped into place.

20121128_101608.jpg   20121128_101702.jpg  
__________________
trip286 is offline  
 
Reply With Quote
Old 11-28-2012, 04:22 PM   #20
Feedback Score: 0 reviews
 
Join Date: Feb 2011
Location: West, by God, Funroe,Louisiana
Posts: 18,707
Liked 9199 Times on 5056 Posts
Likes Given: 74

Default

Now that the pesky barrel is out of the way. You can remove your bolt.

Pull the charging handle outward to disengage it from it's locking notch.
Slide the bolt as far forward as your charging handle can go. (DO NOT JUST LET IT GO. Small parts have a tendency of flying around when such things are allowed. This is usually followed by massive amounts of profanity.)
Remove the charging handle by simply pulling it out. You'll see how it's retained under normal operation as you watch closely while you're disassembling it.
Now, pull the bolt from the receiver.

20121128_101754.jpg   20121128_101807.jpg   20121128_101826.jpg   20121128_101851.jpg  
__________________
trip286 is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
Marlin model 49 & Savage Model 6B Parts Brant2409 General Rifle Discussion 9 04-08-2013 04:14 AM
Savage Model 99 in 300 savage awaysaway General Rifle Discussion 6 10-05-2012 10:51 AM
savage model 64 bigErc .22 Rifle/Rimfire Discussion 18 02-20-2012 03:30 AM
Savage Model 14 American Classic Bolt Action Rifle 18602, 250 Savage, 22 in, Walnut S samuelrh2000 General Rifle Discussion 4 08-18-2011 11:34 AM
Savage Model 12 .223 Gordo323 Range Report 3 05-30-2010 03:28 AM