Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   .22 Rifle/Rimfire Discussion (http://www.firearmstalk.com/forums/f21/)
-   -   Ruger mark ii help! (http://www.firearmstalk.com/forums/f21/ruger-mark-ii-help-38946/)

marlinm60ss123 02-25-2011 01:39 AM

Ruger mark ii help!
 
i have a ruger mark ii with a bull barrel. the serial number says its from 1985 if thats important. i recently took the firearm apart for cleaning and maintnance and when i put it back together the pistol would not fire. the bolt with cycle back but when i pull the trigger it will not go off. i recently discovered that if i tilt the barrel pointing straight up when i pull back the bolt, i am able to engage the firing pin and the gun will dryfire. im wondering if anyone else has had this problem and if they are willing to help because i do not want to pay 65 dollars for ruger to fix it.

JTJ 02-25-2011 01:45 AM

Take it apart and reassemble according to directions. You probably did not hold your tongue right while putting it back together.:D

JonM 02-25-2011 01:58 AM

this is for the 22/45 but the exact same procedure applies to yours.


gadrooning 02-25-2011 02:01 AM

ruger marks are a little tricky when putting back together. Follow the steps on this website exactly!!!! 2245 Maintenance Page

DrumJunkie 02-25-2011 03:14 AM

Those things can get a little funky. But you get it right once it gets a lot easier then. The vid or that manual link can show you all you need.


All times are GMT. The time now is 03:49 AM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.