Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   .22 Rifle/Rimfire Discussion (http://www.firearmstalk.com/forums/f21/)
-   -   Marlin Model 57 .22 SL and LR (http://www.firearmstalk.com/forums/f21/marlin-model-57-22-sl-lr-2079/)

moviezombie 09-30-2007 06:58 AM

Marlin Model 57 .22 SL and LR
 
can anyone tell me anything about this rifle? not having too much luck on google. thanks,

movie zombie

stalkingbear 09-30-2007 03:36 PM

Marlin 57
 
The marlin model 57 was the first of a family of short throw lever action rifles with steel reciever and 1 piece walnut stocks. I have had a couple in .22 mag and .256 win and loved them. They were/are still great rifles that hold their own against any of the other rifles within their class. I really liked the ultra short throw on lever and the stock. The only weak area is firing pin is easily broke. Do NOT dry fire it! This family of rifles is perhaps 1 of the most overlooked "sleepers" I can think of.

moviezombie 09-30-2007 07:01 PM

do not dry fire it because of the weak firing pin?

since i can't find much internet info, is it safe to assume this rifle is no longer being produced? any idea when it was?

thanks for the confirmation that it is indeed a good rifle! this one also has a scope on it........

movie zombie

cwrodenberg 02-08-2008 03:36 AM

serial number help???
 
Friends, I just acquired a beautiful 57 22 mag. Where is the serial number??? cwrodenberg@yahoo.com. Also wheres serial number on nylon66?

robocop10mm 02-08-2008 01:36 PM

Never dry fire a rimfire. The FP will strike the edge of the chamber mouth and bad things will happen. The FP will get broken or peened. The chamber will develop a burr that will interfere with chambering.

Pre 1968 firearms were not required to have serial numbers. Don's freak out if you cannot find one.

blonde1967 09-21-2011 02:01 PM

marlin 57 22 mag
 
does any one know where i could find a inner magazine tube for this gun? it is a marlin 22 mag model 57

c3shooter 09-21-2011 08:58 PM

Blonde- the Levermatic was not made for that many years, and gunpartscorp is sold out of the inner mag tube assemblies for these- HOWEVER- go find yerself a real gunsmith. They DO sell the brass tubes, springs, followers, cap and cap pins for these- any smith worth his salt can make you one that will function.

big shrek 09-23-2011 12:36 AM

Marlin 57M Levermatic - 1960-1969

I've got a Sears 46C/Marlin 56...w/ Sears "Ted Williams" 4x Scope & Marlin Leather Sling
http://www.firearmstalk.com/forums/m...iams-scope.jpg

When I got it, this carbine had been pretty badly dogged out, finish was half-gone, it was covered in a light rust....just awful condition.
A few hours of cleaning and it started to look good again...repainted the reciever with Krylon Flat Black...refinished the stock,
which turned out to be a decent piece of wood! Found the scope for $10 at a pawn shop...
The whole project took about 2 weeks of fiddlin with it after work.

One of these days I'll track down a 57M...its been on my list for a few years... :D


All times are GMT. The time now is 11:11 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.