[ShotgundZombie]

just ran into a speedbump. I cant figure out if the law in Va will alow me to have that big a mag. Somebody please HELP!!!!

[razorbaq]

Just ordered mine, cant wait.

[razorbaq]

Well i got it in today, The mag has no spring, Its got a coil in it. Neat little design but the top seems to be a little tight with the shells. Its doesnt let the shells stick up as high as the stock magazine. I just kept pulling the slide back and dropping rounds in and the round would go in the chamber sometimes but not everytime, Sometimes the bolt just slams and completely misses the round. Im going to try it out tomorrow and I will post the results. Has anyone tried one yet?
Also its not very thick it seems sort of fragile.

[razorbaq]

Well it was just as I suspected it would be, ftl on every round, this magazine is not even worth buying unless I just got a bad one. Im gonna try and modify it where the shell comes out of the mag when it does come out of the magazine it hits the top of the reciever and totally misses the chamber and the bolt slams into the side of the shell. Sometimes the first round would feed but none after the first one. Ruined about 10 bullets trying over and over, had no success. Please someone post back that also has one im just hoping I got a dud.

[Eric0424]

Some issues posted at the link below too.

The New 25-rd Marlin .22 High Capacity Box Magazine is here! - RimfireCentral.com Forums

[illuminae]

Ive had drama with this magazine. Was at the firing range yesterday with it and the feed is good but the magazine doesnt lock into place properly so won't activate the trigger. It goes in enough to get a round in the chamber but the notch at the rear of the magazine doesn't sit at the same position as the nickel plated 10 round magazines.

I love the idea of this magazine but geez is it really crap? Am i doing something wrong. It turned out the only way to get it to fire was to hold the magazine and push it up and slightly back so it would fit properly...

What is going on... can i fix it?

[big shrek]

Originally Posted by illuminae

Ive had drama with this magazine. Was at the firing range yesterday with it and the feed is good but the magazine doesnt lock into place properly so won't activate the trigger. It goes in enough to get a round in the chamber but the notch at the rear of the magazine doesn't sit at the same position as the nickel plated 10 round magazines.

I love the idea of this magazine but geez is it really crap? Am i doing something wrong. It turned out the only way to get it to fire was to hold the magazine and push it up and slightly back so it would fit properly...

What is going on... can i fix it?

Some folks are working on a fix...and folks with problem mags are told to contact Shooter's Ridge and tell them what's going on.

First product runs are often fraught with little headaches...kind of like how you never buy a car the First year it comes out,
because it'll have all kindsa issues until the second/third year models arrive with changes correcting all the things
that First-Year owners found. Like the old 64 & 1/2 Mustang had an underpowered & faulty generator
that was replaced by an alternator in the 1965 model. Or the first-year Kia Soul...argh...don't get me started there

[Boyerracing343]

Will it fit a marlin glenfield model 25?

[big shrek]

Originally Posted by Boyerracing343

Will it fit a marlin glenfield model 25?

Nope, totally different design.

[Boyerracing343]

Originally Posted by big shrek

Nope, totally different design.

Bummer. Thanks though.