Lightweight Ruger 1022 - Page 2
You are Unregistered, please register to use all of the features of FirearmsTalk.com!    
Firearm & Gun Forum - FireArmsTalk.com > Long Guns > .22 Rifle/Rimfire Discussion > Lightweight Ruger 1022

Reply
 
LinkBack Thread Tools Display Modes
Old 03-05-2014, 06:15 AM   #11
disappointed & disgusted, But DETERMINED...
FTF_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
DrFootball's Avatar
 
Join Date: Mar 2013
Location: Northern Arizona(Fmr. NYC & L.I.)
Posts: 8,039
Liked 3373 Times on 2283 Posts
Likes Given: 710

Default

Two other options are the JARD 10/22 barrels, and Houge's barrel and stock( rubber) swap ins...


Sent from my iPad using Firearms Talk

__________________
askdrfootball@gmail.com

"The difference between a successful person and others is not a lack of strength, not a lack of knowledge, but rather in a lack of will." Vince Lombardi

"No One, and I MEAN NO ONE Craps on me and Gets away with it!!! Those days are gone...
DrFootball is offline  
 
Reply With Quote
Old 03-05-2014, 06:51 AM   #12
Feedback Score: 0 reviews
 
Join Date: Mar 2014
Posts: 13
Default

Do you know if you can mount rails on the sides of the 6/8-sided fore-end included in the ATI AR22 kits?

__________________
armadirro is offline  
 
Reply With Quote
Old 03-05-2014, 06:18 PM   #13
JTJ
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
JTJ's Avatar
 
Join Date: Oct 2010
Location: Lake Havasu,Arizona
Posts: 6,879
Liked 2573 Times on 1402 Posts
Likes Given: 738

Default

Mine is 5 lbs 2 oz with a factory barrel, pica tiny rail on the action, TRS25, Butler Creek plastic stock with the Schnabel fore end and an empty 10 round mag. 5 lbs 8 oz with a full BX25 mag. It also has a Hornet trigger and I modified the stock slightly. It is very accurate with a scope. There is some compromise with the TRS25. At 50 yards it will keep all its rounds within the 3 MOA dot which is 1.5" at 50 yards with good ammo.

__________________

Patron Member NRA
"I would not be an old man if I had not been an armed young man." JTJ
I was taught to respect my elders but they are getting harder to find.

JTJ is offline  
 
Reply With Quote
Old 03-05-2014, 06:33 PM   #14
Feedback Score: 0 reviews
 
Join Date: Mar 2014
Posts: 13
Default

Kidd Silver Trigger
Kidd Silver Bolt
Kidd Bolt Buffer
Kidd Silver Cocking Assembly
Kidd Silver V-block

Kidd 18" Silver Lightweight Barrel
Boyd SS Evolution Stock (Going with this because A) it's lightweight and B) I'm a leftie )


That's what I'm going to go with. Seem good?

__________________
armadirro is offline  
 
Reply With Quote
Old 03-05-2014, 07:00 PM   #15
Feedback Score: 0 reviews
 
Join Date: Aug 2011
Posts: 2,457
Liked 293 Times on 233 Posts
Likes Given: 34

Default

If your 10/22 receiver has the wrinkle finish paint get some stripper to get the paint off and then you can wet sand it smooth low luster and mothers polish it to a brighter finish. 800 grit , 1000 and 1500 grit paper . It will show milling marks when stripped but will turn out very nice. If its an older anodized receiver its a bit more work.

.

__________________
hardluk1 is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
my 1022 mark5019 .22 Rifle/Rimfire Discussion 4 09-16-2013 06:32 AM
Half stripped receiver threads On my Ruger 1022 akms47nagont General Rifle Discussion 4 02-16-2013 01:19 AM
ATI AR for Ruger 1022 12fretter .22 Rifle/Rimfire Discussion 1 11-07-2012 10:03 PM
Savage 64 TRR-SR vs Ruger 1022 testarija .22 Rifle/Rimfire Discussion 9 04-14-2012 02:04 PM
legal question about tapco stock 1022 ruger CodyWalkerJr .22 Rifle/Rimfire Discussion 7 04-25-2009 04:22 PM