My 10-22 loves Federal. Not one jam, ever. The factory 10-round magazine was a bit sticky the first few loads though. It just took a heavy smack on the charging handle to seat the round in the chamber. After I'd put 50-60 rounds through each magazine, they all worked fine (I own three of the factory 10-rounders).
I'd read somewhere that the RX-25s can have some burring on the inside of the feed lips. Take it apart and look for any small bumps or casting mould lines in the metal of the lips. Dremel them or sand them slightly, and you should be golden.
I found the Ruger factory sights to be total junk, in my humble opinion. I replaced them with a set of tech Sights (link provided to you earlier). They mimic the battle sights I was used to from firing an M16. My accurracy improved 200% after installing them.
The 10-22 does come with a scope rail from the factory. Never used mine, so I can't give any info on it. It's in a drawer someplace... |