j Stevens.model 87a - Page 2
You are Unregistered, please register to use all of the features of FirearmsTalk.com!    
Firearm & Gun Forum - FireArmsTalk.com > Long Guns > .22 Rifle/Rimfire Discussion >

j Stevens.model 87a


Reply
 
LinkBack Thread Tools Display Modes
Old 11-30-2013, 02:31 AM   #11
Feedback Score: 0 reviews
 
SSGN_Doc's Avatar
 
Join Date: May 2012
Posts: 4,721
Liked 2483 Times on 1457 Posts
Likes Given: 568

Default

Try Numrich gun parts corp. some 187 parts are compatible.
SSGN_Doc is online now  
 
Reply With Quote
Old 11-30-2013, 10:42 AM   #12
Moderator
FTF_MODERATOR.png
Feedback Score: 0 reviews
 
c3shooter's Avatar
 
Join Date: Feb 2008
Location: Third bunker on the right,Central Virginia
Posts: 18,156
Liked 10727 Times on 4642 Posts
Likes Given: 1745

Default

Mike- welcome to the forum. Drop by the intro thread and say hello when you get a minute.

These riles have been out of production for some time. You can check with Savage customer service, and there are SOME used parts from Numrich- HERE: http://www.gunpartscorp.com/Manufacturers/SavageStevensSpringfieldFox-33479/Rifles-40502/87RifleSeries-39863/87A-34285.htm?results=All
__________________
What we have here is... failure- to communicate.
c3shooter is offline  
 
Reply With Quote
Old 11-30-2013, 12:24 PM   #13
FTF_SUPPORTER.png
Feedback Score: 0 reviews
 
Jimski's Avatar
 
Join Date: Nov 2013
Location: Northern Illinois
Posts: 297
Liked 143 Times on 90 Posts
Likes Given: 92

Default

Quote:
Originally Posted by mikewyo View Post
I too have a Stevens 87A 22cal. I have one problem the inside shell extractor is broke. Is there anyplace to get a breech bolt assembly? Is there any other make and or model that is the same??? If any one else knows please advise me. You can contact my direct email at mikewyo50 at gmail.
These rifles were known as "click clack" rifles because you have to hold the trigger back for the rifle to recock then release it to fire again. Not knowing this will cause the rifle to jam and damage the extractor eventually.

I have a Westernfield SB 808c which is the same. It's also the same as a Savage 6 & 87. I get parts for it at POPPERT'S GUNSMITHING online.

I purchased a breach bolt for it and it doesn't work as smoothly as the original. A new extractor for the original bolt worked best.

Not a bad rifle once you get used to the unusual operation.

Jim
Jimski is offline  
 
Reply With Quote
Old 12-01-2013, 12:55 PM   #14
Feedback Score: 0 reviews
 
Hawg's Avatar
 
Join Date: Jan 2009
Location: Heidelberg,MS
Posts: 1,420
Liked 86 Times on 58 Posts
Likes Given: 31

Default

Quote:
Originally Posted by Jimski View Post
These rifles were known as "click clack" rifles because you have to hold the trigger back for the rifle to recock then release it to fire again. Not knowing this will cause the rifle to jam and damage the extractor eventually.
The bolt will stay back as long as the trigger is held back but it will fire as fast as anything else. Mine will jam occasionally with anything other than CCI but those run like grease through a goose.
__________________
DEO VINDICE

http://blackpowdertimes.com/index.php
Hawg is offline  
 
Reply With Quote
Reply

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Firearms Forum Replies Last Post
Stevens Model 58 12 ga Zeo555 General Rifle Discussion 2 05-11-2012 06:11 AM
Stevens model 79 in 410 spittinfire General Shotgun Discussion 5 10-21-2009 11:13 AM
Stevens Model 870 Paintbug .22 Rifle/Rimfire Discussion 3 06-23-2009 01:24 AM
Stevens model 954? bobbyb13 .22 Rifle/Rimfire Discussion 0 05-25-2009 08:50 PM
Stevens Model 86C lorax .22 Rifle/Rimfire Discussion 3 03-11-2009 06:51 PM



Newest Threads