Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   .22 Rifle/Rimfire Discussion (http://www.firearmstalk.com/forums/f21/)
-   -   Issc mk22 (http://www.firearmstalk.com/forums/f21/issc-mk22-41065/)

Batman 04-10-2011 04:04 PM

Issc mk22
 
Hey there! New to this site but thought it'd be a good place to give my opinion on the ISSC MK22 rifle as I have just purchased one last week, and lets just say it's not a good review. So the first time I fired the rifle I had shot probably 150 rounds through it and had constant feed problems and it would constantly catch the empty casing as it tried to load another shell causing it to jam. So I called the place where I purchased the rifle and(everybody is going to jump my case) but he claimed it's cause I did not clean the rifle before shooting, well contrary to belief I've never cleaned a rifle before shooting and have never had problems. So I gave it an extensive cleaning and went out a couple days later(yesterday) and the gun couldn't fire flawlessly with out some kind of malfunction. Issc told me it's the ammo, so I tried different ammo and same problem. The main problem is that the feed ramps do NOT line up with the chamber and the magazine is a very horrible design! So after I gave up trying to break this rifle in I went to clean it and every single screw on the rifle and every part was loose, the rifle is a very poor design and I highly do NOT recommend the rifle to anybody looking to get a tactical .22, I just wanted it because .223 is just too damn expensive to shoot!
If anybody has this rifle please leave some replys.

doctherock 04-14-2011 04:40 AM

Try shooting CCI mini mags or a better non-bulk ammo through it. Some 22lr's are just picky as hell about what they eat.

Third 08-21-2011 11:51 PM

I've been experiencing the same issue.

I field stripped my M-22 right out of the box (I always like to see how things are meant to work on a new gun). Cleaned it up, tightned all the screws, and lubed her up.

Range trip one:
200 of Winchester 40-grain Wildcat (lead)
200 rounds of bulk Winchester Western 36-grain (copper hollows)

Every mag resulted in *several* fail-to-eject, fail-to-feed issues each.

I purchased a pair of additional mags (to rule out a defect with the included factory mag). Cleaned, lubed, and went thru the weapon a second time to tightned everything down.

Range trip two:
300 rounds of CCI 40 grain Mini-Mag (copper coated)
200 of Winchester 40-grain Wildcat (lead)

I did actually get two mags of CCI to run thru without issue. The rest all resulted in *several* fail-to-eject, fail-to-feed issues each.

I want so badly for this gun to behave. It's a real hoot to shoot and I love everything else about it. Both trips to the range, every shooter on the line came over and told me that they like it (usually as I was clearing jammed shells out of it).

I'm sort of at a loss here. I don't know what to try next. I've cleaned it, I've oiled it, I've replaced the mags, and I've tried various ammo.

jsbowman 01-04-2012 07:17 AM

I have an mk22 also. Mine would missfire every time I took it out to shoot it. I counted before 40 shots out of three mags missfired. Now the company is out of business and I'm stuck with a piece of crap.. I dropped it off at a gun smith 5 months ago n he can't figure it out either

danf_fl 01-04-2012 08:12 AM

There could be an issue with the ammo.

Also the chamber. European CIP dimensions and American ANSI are different (that is why Stingers have that warning on the CCI website.)

I have a .22lr semi-auto that call for high velociy ammo only. Federal standard .22lr round nose will not provide enough energy to function the slide (it's a pistol).

Could be the mag. New owners of some firearms load the mag incorrectly and spread the lips (leads to misalignment).

Paladin201 01-04-2012 12:12 PM

Never owned one, but I've heard endless hurry stories.

jsbowman 01-06-2012 06:46 AM

I have used 5 difpin ferent types of ammo.the firing spring sounds really weak

Big8 01-25-2012 09:12 PM

Msr mk22
 
man this is dicouraging to read i just got one of these for my son for X-mas and have the same issues. Now i guess i know why they have no website or do not answer their phone. I bought it at Dunhams sports i am going to run it back there and see if they will do anything.

jsbowman 01-26-2012 07:03 AM

1 Attachment(s)
I found the contact info

jsbowman 01-26-2012 07:05 AM

They switched dealers in the USA so this is why I was having problems. The main website was www.issc.aus and they pointed me in the right direction


All times are GMT. The time now is 03:56 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.