Originally Posted by hareebrownbeest
I like this one, price is good too.
Installed my cheek rest a few minutes ago.
Started with a small center drill, then a 1/8", then a Q, then the required 3/8".
The stock is hollow, so you center drill all 4 holes; you don't have to drill all the way through - which would likely result with missing the mark
on the other side. All four holes were drilled separately. You figure out where you want the check rest, then aline the template and tape in place. I didn't use lock tight on the steel Torx screws. But it suggests you do.
Now all it needs is the bipod.