Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   .22 Rifle/Rimfire Discussion (http://www.firearmstalk.com/forums/f21/)
-   -   Erma EP22 wont cock (http://www.firearmstalk.com/forums/f21/erma-ep22-wont-cock-475/)

6shooterjunction 05-18-2007 04:09 PM

Erma EP22 wont cock
 
This pistol is a German made .22 Luger look
alike that utilizes a flat sear and a firing pin block(what I would
call a hammer)which engages the sear at a 45 deg angled edge. The
problem is that unless the sear is released it wont cock. The firing
pin block(hammer)wont slide back past the sear causing the toggle
mechanism to jam. It seems like there should be some way for the sear
to drop allowing the block to slide over and past it but the sear
release isnt allowing it to unless the trigger is pulled. I have the
parts illustration for it and have it taken down now and have been
studying it hard but I just cant see how the action is supposed to
allow it to cock. Can someone explain this to me?

WILDCATT 05-18-2007 09:21 PM

Cocking
 
I belive the sear piece slides over a piece in grip.I should know as I have two and one cocks but slips.I need to repair the sear piece.I will take mine down an check may take a day or so. :mad: :confused:


All times are GMT. The time now is 10:51 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.