Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   .22 Rifle/Rimfire Discussion (http://www.firearmstalk.com/forums/f21/)
-   -   Counting down the hours.... (http://www.firearmstalk.com/forums/f21/counting-down-hours-73686/)

Gh0zt36 10-04-2012 10:49 AM

Counting down the hours....
 
So I sold the 10/22T yesterday @ 5pm , was a nice gun but just wasn't for me .....

Moments later I called my LGS and asked if they had any 10/22 takedowns. And to my surprise since it's more of a ammo shop than a gun store. They had just got one in an hour before I called. Bit pricey 375.00 out the door. But apparently it comes with a lifetime warranty for that price. So It's worth it I guess. The shop ownerclosed 10 mins before I got there. But he opens at 10am just over 3 hrs from now. Can't wait . This is the 10/22 I wanted . I'm going to buy a small scope . maybe a BSA 10/22 sweet if it will fit in the bag .

If anyone has any cheap scope suggestions for 100yrds and under that hold a zero well. Postem . So thats it . I'll post pics in a few hours when I getter home.

JTJ 10-04-2012 01:07 PM

The BSA Sweet 22 is a little bulky. http://swfa.com/BSA-3-9x40-Sweet-22-Riflescope-P42505.aspx
Consider this one. http://swfa.com/Konus-15-5x32-Konuspro-Shotgun-Scope-P47361.aspx
You could get some quick detach rings and just remove the scope if it does not fit the bag..

Gh0zt36 10-04-2012 06:00 PM

Quote:

Originally Posted by JTJ (Post 963896)
The BSA Sweet 22 is a little bulky. http://swfa.com/BSA-3-9x40-Sweet-22-Riflescope-P42505.aspx
Consider this one. http://swfa.com/Konus-15-5x32-Konuspro-Shotgun-Scope-P47361.aspx
You could get some quick detach rings and just remove the scope if it does not fit the bag..

I found a really good price on a nikon pro staff . This rifle is gonna be one sweet shooter!!!!

http://www.midwayusa.com/product/184657/nikon-prostaff-rimfire-rifle-scope-3-9x-40mm-bdc-150-reticle-matte?cm_cat=CheckoutConfirm&cm_pla=ProductDescrip

didnt have enough for rings though.... do they need to be 1" to fit the rail that comes with the takedown ???

Old_Crow 10-05-2012 06:36 AM

Quote:

Originally Posted by Gh0zt36 (Post 964241)
I found a really good price on a nikon pro staff . This rifle is gonna be one sweet shooter!!!!

http://www.midwayusa.com/product/184657/nikon-prostaff-rimfire-rifle-scope-3-9x-40mm-bdc-150-reticle-matte?cm_cat=CheckoutConfirm&cm_pla=ProductDescrip

didnt have enough for rings though.... do they need to be 1" to fit the rail that comes with the takedown ???

You need one inch rings for that scope. You are going to have to buy a base for the rings. The take down is only drilled and tapped. I highly recommend the combination dovetail base. The combination base is extremely rigid. I have seen it used cantilever style on Mosin Nagant's - it never bounces.

mdauben 10-05-2012 11:43 AM

Quote:

Originally Posted by Old_Crow
You are going to have to buy a base for the rings. The take down is only drilled and tapped.

My 10/22 TD came with a base and set of screws to attach it. It is kind of flimsy though so I replaced it with an inexpensive aluminum rail.

Gh0zt36 10-05-2012 04:29 PM

yea it came with a base .... I just need rings right now . but im broke lol I blew threw my 530.00 budget for this set up haha ... oh well least the scope will look cool in the box :)

JTJ 10-05-2012 04:57 PM

I suggest you get rings with quick disconnect levers unless the bag is big enough to take the scope attached.

jjfuller1 10-05-2012 05:06 PM

Quote:

Originally Posted by Gh0zt36 (Post 965435)
yea it came with a base .... I just need rings right now . but im broke lol I blew threw my 530.00 budget for this set up haha ... oh well least the scope will look cool in the box :)

thats a great scope. you will need 1 inch rings to fit the scope. however, you need to check the base or mount. i know alot of .22 rifles use a 3/8 dovetail.

so if thats the case i suggest this..
http://www.amazon.com/UTG-Airgun-Medium-Profile-Integral/dp/B002TUSJVQ/ref=sr_1_9?ie=UTF8&qid=1349456538&sr=8-9&keywords=one+piece+scope+mount+3%2F8
i have one for my marlin and nikon combo. works great!

if its not the case then you should be fine with any standerd rings.

you should post up a picture or 2

Gh0zt36 10-05-2012 08:04 PM

1 Attachment(s)
This is it so far ... I just got my 2 Ruger BX-25 mags in the mail today. But I ordered the scope online as you saw and don't have it yet . When I get more money I'm going to modify a butler creek folding stock for it too . And depending on how it shoots I might get a voltsquartzen trigger group . But if it shoots well ima leave it as is. This is also my very first brand new rifle. :D

MOshooter 10-06-2012 01:29 PM

Very nice rifle,Congrats!


All times are GMT. The time now is 04:53 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.