Firearm & Gun Forum -

Firearm & Gun Forum - (
-   .22 Rifle/Rimfire Discussion (
-   -   anschutz trigger adjustment (

dwl56 04-28-2012 11:30 PM

anschutz trigger adjustment
Hi Folks,

I have a Savage/ Anschutz Model 184 Sporter ( circa 1972 ) and was wondering if anyone knows the proper way to adjust the trigger pull on this rifle?



hardluk1 04-29-2012 10:53 PM

Seen some info that side it would adjust like a model 64 match triggerr.
See it your looks like this one.-

You might go to rimfirecentral and see if the guys at the anny section can help.
Guess I can't help

cbibb 05-01-2012 01:14 AM

I have two 64 actions and trigger adjustment is fairly simple weight is done through the trigger guard and over travel is done by taking the action out of the stock and there is a screw in the trigger housing when i did mine I backed the overtravel screw out and adjusted the weight screw to what i wanted then set the overtravel then test it at the range if you do it back wards you can have a slam fire that trigger i think goes down to 2.5 lbs good luck

dwl56 05-01-2012 01:08 PM

Anschutz trigger
Thanks for the description, but I need to know what part of the screw is what, because there is an outer ring around the screw and I am not sure which is the over travel and which is the adjustment and which way do I turn them to lower my poundage.

cbibb 05-02-2012 02:39 AM

Go to Anschuts web sight and find a manual for a 64 action and that should also tell and show you the have down load able manuals

hardluk1 05-02-2012 01:58 PM

Or go over to RIMEFIRECENTRAL , drop down to the anshutz section and ask for help. You may even check youtube to see if a video an help walk you through it.

dwl56 05-03-2012 01:25 PM

Thanks Guys

All times are GMT. The time now is 09:56 PM.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.