Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   .22 Rifle/Rimfire Discussion (http://www.firearmstalk.com/forums/f21/)
-   -   99m1 (http://www.firearmstalk.com/forums/f21/99m1-9324/)

ranger rick 12-21-2008 06:01 AM

99m1
 
I recently acquired a Marlin model 99M1 and it will not load, I am looking for a manual and any knowledge about this piece, cannot find any info and it has sentamental value so I would like to restore it so I can pass it on to my son

zrozano 12-23-2008 12:06 AM

can you tell us the exact problem? it wont load as in you can get the magazine in, or when you go and cock it, it wont pull back and subsequently it wont load the bullet into the chamber?

zrozano 12-23-2008 12:09 AM

actually i just found a thread in this forum just like yours--

and im quoting user c3shooter "Suggest you contact marlin- (marlingun.com) and see if they have a manual. Common problems to rimfires are: Action is cruddy and needs cleaning (22 RF ammo is pretty dirty) OR: Gun has been dry fired too much, and pin has put a burr on mouth of chamber (sign is a scratch mark on side of case when extracting) IF that is the problem, DO NOT REMOVE THE BURR- but I can tell you how to fix it- easily."

http://www.firearmstalk.com/forums/f37/marlin-model-99m1-9102/#post56136

no after action report was filed by the original poster, so i do not know what he did...

denjask 12-31-2008 01:00 AM

I have a 99m1. Mine is tube fed. If yours is the same the lifter ( not sure thats the proper term) could be dirty and that is causing your problem. When I first got mine it fed unreliably until I fully disassembled and cleaned it. Now it runs fine. By the way it really likes CCI minimags.


All times are GMT. The time now is 11:05 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.