had some time to do some work on the kriss today. im still far from being finished. heres what i did in 3 hours
first time using a plasma cutter and brake press (bending sheet metal)
plasma cutter allows me to cut 16 gauge sheet metal like butter. a lot faster than using a dremel or a angle grinder.
also i used a brake press to bend the upper part of the receiver in 2 places.
i already cut out 2 pieces of the lower receiver.
things to do:
weld the round tube pieces to the square tubing stock.
weld the stock to the upper receiver
weld butt plate to stock
epoxy glue rubber butt pad to the butt plate
draw template for pistol grip/trigger guard area and plasma cut it
add 20" in picatinny rail to the upper receiver for MBUS/eotech
add picatinny rail to the lower receiver for magpul
plasma cut and weld the floor of the receiver
drill holes similar to the KRISS
weld brackets to the upper and lower receiver for easy disassembly
add fake selector and safety switches
weld bracket to reuse action screw
jb weld 10/22 rotary mag to a extended pistol mag
cut 10/22 trigger guard
cut pvc piping for fake suppressor
fill gaps in the lower receiver
plasti dip the pistol grip
draw a template for cheek weld on the stock and plasti dip
draw and cut out a kriss logo to the lower receiver
clean up the edges and repaint it all black