Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   .22 Rifle/Rimfire Discussion (http://www.firearmstalk.com/forums/f21/)
-   -   10/22 Ruger into a M200 Cheytac Intervention (in progress) (http://www.firearmstalk.com/forums/f21/10-22-ruger-into-m200-cheytac-intervention-progress-59398/)

defcon 03-04-2012 04:25 AM

10/22 Ruger into a M200 Cheytac Intervention (in progress)
 
OMG this thing is sooooooo bad ass!!!!

I just picked up this full metall M200 Cheytac Intervention

It retails for $650 but it cost me $300 for the shell used.

I just finished gutting. I did some test fit and the Ruger 10/22 can fit inside however my dremel isn't good enough to cut out the thick metals. I need to go to my gunsmith and have him mill out the receiver and the barrel since its faster and more precise. I'm likely going to cut my trigger guard off my 10/22 and use an extended trigger so I can use the existing trigger guard of the M200.

Also I'll be using a 29" barrel from urbanrifle.com. If it's too short, then I'll cut down the M200 barrel to match the length of the 10/22 barrel.

This thing is extremely heavy. I'll weigh it tomorrow but it feels like its about 20lbs without optics.

Right now its about 40% done. Hopefully the milling goes well when my gunsmith has time to work on it.

http://farm8.staticflickr.com/7053/6...bd7b54fa_b.jpg
_MG_9999 by defconskylude, on Flickr

http://farm8.staticflickr.com/7045/6...11224b9f_b.jpg
_MG_9997 by defconskylude, on Flickr

http://farm8.staticflickr.com/7203/6...ee13d5ea_b.jpg
_MG_9996 by defconskylude, on Flickr

http://farm8.staticflickr.com/7199/6...3c09061b_b.jpg
_MG_9994 by defconskylude, on Flickr

http://farm8.staticflickr.com/7039/6...99e30d55_b.jpg
_MG_9992 by defconskylude, on Flickr

http://farm8.staticflickr.com/7185/6...64965a86_b.jpg
_MG_9987 by defconskylude, on Flickr

http://farm8.staticflickr.com/7201/6...d5b65a90_b.jpg
_MG_9986 by defconskylude, on Flickr

http://farm8.staticflickr.com/7066/6...8139bd67_b.jpg
_MG_9979 by defconskylude, on Flickr

hardluk1 03-04-2012 05:14 PM

Not a real cheytec right? Then WHy!! rather have it returned to useable condition. Is the barrel junk? If not you need what a bolt and trigger group.

defcon 03-04-2012 05:21 PM

Quote:

Originally Posted by hardluk1 (Post 728621)
Not a real cheytec right? Then WHy!! rather have it returned to useable condition. Is the barrel junk? If not you need what a bolt and trigger group.

Its a metal airsoft shell. Nothing is broken. Its in mint condition. I want a .22 version of he cheytac

pontiac163 03-04-2012 05:49 PM

Thats going to be an awesome .22 when its done.

defcon 03-22-2012 03:53 PM

a quick update.

i grinded out majority of the metal internals using a heavy duty angle grinder. my dremel wasnt doing it due to the thin cutting disks.

also ive decided to put a .22 bolt action into this chassis. i purchased a Marlin XT-22 and a Savage MKII F.

XT-22 is getting picked up this Sunday so i get to finally drop it in for test fitment.

Savage MK II is on special order and should arrive in 2-3 weeks.

primer1 03-22-2012 05:00 PM

A 20 lb .22? I hope your man enough for the fierce recoil. Sounds like a fun project, keep us updated.

defcon 03-22-2012 05:08 PM

Quote:

Originally Posted by primer1 (Post 748299)
A 20 lb .22? I hope your man enough for the fierce recoil. Sounds like a fun project, keep us updated.

hehe its just a range toy. :p

deerkiller03 04-24-2012 10:44 PM

well i would like to see some more pictures of it if you can, like recent updates on it

defcon 04-24-2012 10:46 PM

sure. i just bought a second M200 Intervention. ill take pics of both when it arrives this week.


All times are GMT. The time now is 09:56 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.