Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   Stupid Newb Question (http://www.firearmstalk.com/forums/f20/stupid-newb-question-8300/)

Jefe' 11-09-2008 11:10 PM

Stupid Newb Question
 
So after some good advice in my other thread on shooting accuracy, I general shot better this w/e when standing and not resting the gun on the bench.

But I have a real stupid question that I can't seem to work out. As I mentioned in the other thread, I have the Eotech 552. I'm not understanding how you can keep the optical sight zeroed between trips to the range. I take it off to clean the rifle after a day at the range, and then when I go back to the range and put it on, of course I have to zero it again. So I have this install-zero-shoot-remove-clean-install-zero vicious circle going.

>>How do you guys keep your optics zeroed and ready to go after cleaning your rifle and before the next trip to the range? Are you leaving the optic on the rifle when you clean the rifle?

Txhillbilly 11-10-2008 12:34 AM

I leave my scopes on when cleaning most of the time. But I have taken them off several times and put them back on the rail in the same location without loosing zero. If you put the Eotech back in the same location you shouldn't loose your zero. I use a scope and a red dot on my 44 Mag revolver and I have never had a problem with loosing zero on either just mark the rail where you put your optics on and put it back in the exact location when reinstalling.

Dillinger 11-10-2008 01:02 AM

There is really never a reason to pull your scope unless your rifle has been completely dropped in mud/water/oil.

Having said that, there are several makers of scope mounts out there that allow for a quick removal and return to zero - though no one guarantees ABSOLUTE zero...

I believe Larue Tactical out of Texas makes such an animal and usually includes it with most of their EoTech packages, but I have never personally played with it....

Jefe' 11-10-2008 03:15 AM

Thanks for the replies. Maybe I didn't get it back on the same groove in the rail that I had it on the first time. From now on, I'll just leave it on the rifle when I clean it. Thanks again!


All times are GMT. The time now is 07:15 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.