Firearm & Gun Forum - FireArmsTalk.com

Firearm & Gun Forum - FireArmsTalk.com (http://www.firearmstalk.com/forums/)
-   AR-15 Discussion (http://www.firearmstalk.com/forums/f20/)
-   -   Score !!!!!!!!! (http://www.firearmstalk.com/forums/f20/score-76783/)

purehavoc 11-20-2012 10:36 PM

Score !!!!!!!!! Colt guys this ones for you :)
 
4 Attachment(s)
Finally got them picked up today ,
Colt 20" HBAR 1:7 5.56 assembly minus gas tube
and a Colt 16: 1:9 5.56 HBAR upper minus CH and BCG , C marked forged upper also
For a whopping $300 total .
All you colt guys help me out here on what I really have because Im not a Colt guy and really have no idea what I have. The flash hider on the 16" is more of a compensator with 3 set screw in it , the machined slots do not go all the way thru and its pretty solid all the way to the end .
Shiney handguards on the 20" and small hand guards on the 16"
The upper on the 16" is small pin so it does fit my current lowers

PICS

AgentTikki 11-20-2012 10:53 PM

fogets whats on the outside of it.

how's the bore and chamber? do you have a go/no go gauge?

purehavoc 11-20-2012 10:56 PM

The man bought these both new he said over 10 yrs ago he couldnt remember how much longer than that . he estimated 200 rds thru the 20" and less than 100 rds thru the 16" . bore and chamber are clean but the carry handle was nasty dirty with dust . Got to check them out on the go/ no , just got home with them ;) flash gider and muzzle brake were really pretty clean so I would say they have either been kept clean prisitine or not much use. The guy told me to take a look and checkthem out over the next few days and if Im not satisfied with them he would give me my $$$ back and had another buyer . No worries for the $300 I have in them they arent going back with that little use. i dont think the 20" barrel is cut for M4 ramps they arent as wide or as long as the 16" ramps. I will get more pics up tonight , dont worry

orangello 11-20-2012 11:24 PM

SWEET! No squirrel will be safe.
;)

AgentTikki 11-20-2012 11:54 PM

Nice score man!

what'ya got planned for them babies?

purehavoc 11-21-2012 12:02 AM

Quote:

Originally Posted by AgentTikki (Post 1021927)
Nice score man!

what'ya got planned for them babies?

In all honesty, I already have plans for the 20" and started building it tonight . The 16" I'm planning on selling to fund my. 300 blk

purehavoc 11-21-2012 02:38 AM

The 16" is for sure a HBAR the 20" is not a HBAR after removing the handguards , the 16" has a date code of 3/96 the 20" does not have a date, it just has a 15 stamped in the same area in which the date code would be ,which leaves me stumped for a production date , I believe its a standard A2 20" match barrel since its a 1:7 . The ramps are M4 ramps as I put it in a mil spec upper and everything matched great .Any Colt guys out there have any info for me ?

purehavoc 11-21-2012 04:23 AM

Heres the 16" mounted up , I really like the gray look of the upper . Now I just need the rifle stock , standard grip , trigger guard and put the 20" barrel on the colt upper so I can keep it all colt and put the 16" on one of the other stripped uppers


http://img.photobucket.com/albums/v5...120_222036.jpg


All times are GMT. The time now is 04:44 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.