[X-mark]

Originally Posted by AgentTikki

I am planning 15" for a 20 or 18" spr build...eventually....someday, soon hopefully.

If you like long handguards on long barrels, take a look at the new 16.7" NSR. Here is one on a 18" barrel:

[JeffCooper]

Originally Posted by clue

Here is a picture

I'll go with a less poular suggestion:

Magpul MOE. Affordable, cool, comfortable and modular. What I like most are the different lengths of modular rail you can bolt on. My first build has an MOE forend with an AFG on the bottom, and you can see the rails. I also added another piece of rail to secure a surefire light. I guess what I dislike about the rails is that HAVE to wear glove..for heat and the meat-grinder-like action that will chew up your hand. That and someone mentioned "how much rail do you need?"

Just my $.02

[clue]

I'm a little late on keeping you all updated since I finished my build a few weeks ago.

I decided to go with the Midwest Industries Gen2 SS rail. I started off by chopping down the front sight post and then realized that wouldn't work. I had to go ahead and remove it and install the Midwest industries low pro gas block.

I went ahead and did everything myself. I had to pony up and buy some tools I didn't already have,but now I think I have everything I need to build my next one from the ground up. Thanks everyone for your help and suggestions. I appreciate it.

[clue]

Sorry if the picture quality is bad. It was taken from my phone. Will try to get better ones later.

[CamoToe1]

Very nice Black and Tan. I have the 13" Vtac, and if I were to do it again, the MI SSgen2 would be hard to pass up.

What optic if any are you going with? A T1 of H1 would work nicely with that lightweight setup. Have you had the chance to weigh it?

[clue]

Originally Posted by CamoToe1

Very nice Black and Tan. I have the 13" Vtac, and if I were to do it again, the MI SSgen2 would be hard to pass up.

What optic if any are you going with? A T1 of H1 would work nicely with that lightweight setup. Have you had the chance to weigh it?

I haven't decided on optic yet. I would love to go with the Aim Point but man they are expensive. I haven't had a chance to weigh it yet. I will try and remember to borrow our portable scale from work soon and get a good accurate weight.